Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3781505 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair To Road, Berms, Path, Road Furniture In Domestic And Technical Area At Barnala Under Ge (af) Halwara |
| Last Date For Submission | 18th Apr, 2026 |
| Opening Date | 20 Apr, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 80000.00 |
| Estimated Cost | 0.00 |
| City | HALWARA |
|---|---|
| State | Punjab |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms & finally fanning the cleaned surfaces with air compresser to remove all loose dirt etc. complete all as specified and directed. | 698.00 | X Sqm |
| 2 | M&L applying evenly a priming/ tack coat with paving bituminous primer at 5 kg/ per 10sqm complete all as specified and directed. | 1223.00 | X Sqm |
| 3 | M&Lfor premixed bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen (VG-30) , binder content 4% by weight of total mix for repair to road depression, pot holes etc complete all as specified and directed. Notes: (i) Preparation of surface and priming /tack coat shall be measured and paid separately. (ii) Hot Mix plant of adequate capacity shall be used for heating and mixing of agregates and binder shall be laid in single layer with mechanical sensor paver all as specified and directed. (iii) The design mix shall be carried out from zonal lab/Govt Engg college/IIT/NIT/CTL or any E-in-C/MES approved lab as approved by GE before incorporation in work. | 39.38 | Per Cum |
| 4 | M&Lfor laying Bituminous premix semi dense asphaltic concrete 30mm thick consolidated thickness with paving bitumen (VG-30) , binder content @ 5.5 % by weight of total mix. including supply and mixing of filler (OPC Cement) as per design mix spread using mechanical senser paver roller and compacted with 8 to12 ton power roller and compacted required camber and gradient complete all as specifiued and directed. Notes; (i) Hot Mix plant of adequate capacity shall be used for heating and mixing of agregates and binder (bitumen) for bituminous carpet . premixed concrete shall be laid in single layer with mechanical sensor paver all as specified and directed. (ii) The consolidated thickness indicated above shall be the minimum thickness and in case additional materials are required to make good the depression etc to achieve the required camber & slope etc the same shall be provided by the contractor and the cost of the same shall be deemed to be included in quoted rates of the above item. (iii) The design mix shall be carried out from zonal lab/Govt Engg college/IIT/NIT/CTL or any E-in-C/MES approved lab as approved by GE before incorporation in work. | 698.00 | X Sqm |
| 5 | M&L for preparing bituminious surfaces of road and marking 1.00mm thick center lines,stop lines, dashes,arrows, letters etc and the like n exc 10cm wide on roads, pavements with hot thermoplastic road marking paint of approved colour confirming to BS-3262-1989, with special applicator machine all as per manufactureres instructions with glass beads @ 250 gms per sqm complete all as specified and directed. | 3800.00 | RM |
6 Days Left