Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4859443 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Urgent Minor Works To The Installed Lifts At Dh Handwara. |
| Last Date For Submission | 13th Jul, 2026 |
| Opening Date | 13 Jul, 2026 |
| Document Cost | 200.00 |
|---|---|
| EMD | 3700.00 |
| Estimated Cost | 185000.00 |
| City | Handwara |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing and laying Plain Cement Concrete (PCC) in M-20 grade inside the machine rooms of 1+4 (02 Nos.) lifts and G+4 (01 No.) lift for enclosing the bottom gaps to prevent rodent entry into the lift machine rooms located at the attic of the hospital building. The work includes curing of the concrete, centering, shuttering, and finishing complete in all respects, but excludes the cost of reinforcement. | 2 | cum |
| 2 | Providing/fitting of MS angle iron supports to above ceilings gap areas, for closure , for pigeon proofing to machine rooms of 03 lifts and proving of necessary supports to ceiling ACP sheets of machine rooms as directed by Engineer in charge. Supports are to be fabricated out of ISA 40X40X4 and properly welded with attic truss members. Job includes applying of 1 coat of metallic primer to structural steel work. | 340 | Kg |
| 3 | Fabrication/fitting of MS angle iron support frames for mounting of MCB Boxes inside machine rooms of 03 lifts at space directed by Engineer in charge. Supports frames are to be fabricated out of ISA 35X35X5 and properly welded with attic truss members. Job includes applying of 1 coat of metallic primer to structural steel work. | 40 | kg |
| 4 | Shifting/ carriage of material ( angle iron), aggregate, sand , cement and other material for execution of job from ground floor to 6th floor attic level of Hospital building by means of head load. | 1 | job |
| 5 | Dismantling of cabling from MCB Boxes of 03 Nos. lifts installed outside the respective machine rooms and refitting the same inside the machine rooms by engaging skilled electricians/technicians. The job includes dismantling, rerouting, and refixing the complete cabling network to the respective MCB Boxes, ensuring proper termination, dressing, testing, and commissioning of the electrical connections. The scope of work also includes providing and fixing suitable cable clamps, cable ties, supports, saddles, and other required fixtures for proper routing and securing of cables inside the machine rooms. Further, the work includes proper hanging and securing of all 3-phase incoming power cables in the attic using suitable clamps, cable ties, supports, and other necessary fixtures wherever required, ensuring safe, neat, and standard installation as per the directions of the Engineer-in-Charge.The contractor shall arrange all labour, skilled electricians/technicians, tools, tackles, testing equipment, consumables, POL (Petrol, Oil & Lubricants), transportation, and all other materials required for satisfactory completion of the work. | 1 | job |
6 Days Left