| 1 | Maa Chandi Devi Temple | | |
| 2 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based spot light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "Electromagnetic Compatibility Directive - EN 61547:2020", Mounting Structure: Adjustable surface mount yoke arrangements in the die cast for fixing. Power consumption: 12-16W, CCT: RGBW (6000K - 7000K) (as per the design approval), Optics: PMMA/PC Lens with holder, Beam Angle: 25 /45 /60 (as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distriB5:B18 spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump/ strobe, Micro function and speed. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10 C to +60 C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, HV & IP66, Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. ( Along With Connector As Required . With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | 12 | Nos |
| 3 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based spot light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "Electromagnetic Compatibility Directive - EN 61547:2020", Mounting Structure: Adjustable surface mount yoke arrangements in the die cast for fixing. Power consumption: 18-24W, CCT: RGBW (6000K - 7000K) (as per the design approval), Optics: PMMA/PC Lens with holder, Beam Angle: 25 /45 /60 (as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump/ strobe, Micro function and speed. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10 C to +60 C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, HV & IP66, Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. ( Along With Connector As Required . )With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | 22 | Nos |
| 4 | SITC of high quality Multi Color Neon Flexible light, Protection Rating : IP65, Mounting Structure : Adjustable wall mount aluminium profile for fixing the lights. Power consumption : 10-15W, CCT : RGB/RGBW, (as per the design approval) Beam Angle : 120 , Control : DmX512 Channel : 4 CH, Power Input : DC 24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Fixture will be suitable to operate in a temperature range of 0 C to 50 C , LED life time should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. LED Makes should be CREE, LumilLED, Osram, Seoul, Epistar, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. ( Along With Connector As Required . ) With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | 100 | Mtr |
| 5 | SITC of Aluminium Profile for Neon flex | 100 | Mtr |
