Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4090135 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair To Sunken Floors Toilet Fitting Internal Water Supply Of Jcos Or Md Accn And Otm Accn Of Zone B At Hisar Mil Stn |
| Last Date For Submission | 27th May, 2026 |
| Opening Date | 29 May, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 160000.00 |
| Estimated Cost | 9000000.00 |
| City | Hisar |
|---|---|
| State | Haryana |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Demolition of cement concrete(unreinforced)/ lime concrete as in sunken portion / ground floor of any description and any thickness including removing rubbish complete all ass specified and directed. | 200.00 | Cum |
| 2 | M&L for applying two coats of polymer modified cementious water proof coating with Sika Topseal 107 or or equivalent make in list of makes as approved by GE applied in two coats @ 3kg/sqm over a saturated surface to sanwiched with glass fibre reinforcement: Sika Fab-1 now called as Sika Fabric-50 or equivalent make in list of makes as approved by GE over base coat as per manufacturer's instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion. Note : The interval between each coat of coating application is 6-8 hrs. The 2 coats must be applied at right angle to each other with a brush. Finally sprinking sand over the second coat for better adhesion with plaster | 1040.00 | Sqm |
| 3 | Supply only glass fibre fabric. Make : Sika Fab-1 now called as Sika Fabric-50 or equivalent make in list of makes as approved by GE complete all as specified and directed. | 1040.00 | Sqm |
| 4 | M&L for rendering of uneven surfaces at bottom and sides up to floor level with 15 mm thick CM 1:4 finished even and smooth (without using extra cement) mixed with and including integral water proofing compound Sika Plastocreat plus or equivalent make in list of makes as approved by GE @ 0.2% by wt of cement consumed including filling it with water to check dampness and seppage and where dampness / seppage is noticed, nozzles shall be fixed and grouting carried out. Note :- WPC Shall be measured seperately. | 1040.00 | Sqm |
| 5 | Supply only integral water proofing compound of Sika Plastocreat plus or equivalent make in list of makes as approved by GE @ 0.2% by wt of cement consumed | 19.00 | Kg |
6 Days Left