| 1 | Excavation by mechanical means (JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation ,watering, including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter. Complete in all respect as per Design, Drawings Specifications and Instructions of Engineer-in-Charge. | 1.000 | cum |
| 2 | Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge. | 1.000 | cum |
| 3 | Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tap) as per IS 10221 Including of Primer etc. excluding cost of excavation Complete in all respect as per per Design, Drawings, Specifications and Instructions of Engineer-in-Charge. ( b) 150 mm internal diameter) | 1.000 | Mtr |
| 4 | Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge. (b) 100 mm internal diameter ( For Overflow outlet and Drain Outlet) | 1.000 | Mtr |
| 5 | Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc on surface and providing angle iron support or cement concrete block as support including painting with two or more coats of synthetic enamel paint of required shade Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge. | | |
