Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4658319 |
|---|---|
| Organisation Name | Kolkata Metropolitan Development Authority |
| Tender Brief | Corrigendum : Electro-mechanical Work For The Job Construction Of Proposed Double Furnace Electric Crematorium At Udaynarayanpur, Howrah. |
| Last Date For Submission | 13th Jul, 2026 |
| Opening Date | 15 Jul, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 316205.00 |
| Estimated Cost | 15810245.00 |
| City | Howrah |
|---|---|
| State | West Bengal |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Pollution Control Unit | ||
| 2 | Supply & delivery at site, installation, testing and commissioning of M.S. Self supported chimney of 30 Mtr. Length having PCD :- 1425mm, bottom dia:- 1250mm & 8 mm thick on existing R.C.C foundation, top dia:- 600mm & 5 mm thick FDN bolt- M36 ( RCC foundation is within the scope of work of the civil department & RCC foundation height should not be less than 600mm from actual GL), M.S. ladder, inspection door, operating platform, aviation lamp, lightning arrestor etc. complete. | 1 | Unit |
| 3 | Supply, delivery at site. Installation, testing of S.S. (Grade-304) Fabricated Ventury Scrubber having 2Mtr height, dia not less than 700mm, 2.5 mm thick & Packed wet scrubber having width 900mm, 2.5mm thick with specially design brass made nozzle, fume discharge 1800 cu.m per hour dialing with interconnection SS pipe of 300mm, 1.5 inch water pipe line & outlet pipe line having dia 75mm to 80mm with pressure release valve accessories complete and S&F of AISI SS-304(2.5 mm thick )piping interconnection between scrubber to mist eleminator as required including foundation as per technical specification. | 2 | No. |
| 4 | Supply, delivery at site, installation, Testing of S.S. (Grade-304) 2.5 mm thickness fabricated dropler separator/Mist eliminator with all accessories Complete incl suitable foundation (L X B X H) at a height of not less than 600mm from GL as per technical specification. | 2 | No. |
| 5 | Supply and delivery at site, installation, testing and commissioning of Squirell cage Inuction motor not less than rating of 415V 7.5/10 (KW/HP) Centrifugal for Induced draught air fan having capacity not less than 2200 CFM, impeller SS 316, rpm 2800 along with S&F of suitable dia & length of SS 304 duct line interconnection between delivery of ID fan & chimney body inel cutting of suitable diemension of chimney body for inertion of duct along with suitable rain protecting hood for ID fan complete including suitable foundation (L X B X H as desired by EIC depending upon site condition) at a height of not less than 600mm from GL as per technical specification. | 2 | No. |
13 Days Left