Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4035378 |
|---|---|
| Organisation Name | Mishra Dhatu Nigam Limited |
| Tender Brief | Corrigendum : Annual Maintenance Contract For Non Dsr Items For Maintenance And Minor Works At Midhani Plant, Corporate Office, Amtl, Hostel And Township, Hyderabad - 58 |
| Last Date For Submission | 11th May, 2026 |
| Opening Date | 12 May, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 0.00 |
| Estimated Cost | 1398287.00 |
| City | Hyderabad |
|---|---|
| State | Telangana |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply & Applying Specialized acrylic elastomeric caulking compound treatment to cracks of walls at exterior side at all heights & levels as per instruction of Engineer-in-Charge. | 250 | RM |
| 2 | Providing & fixing double leaf frameless glazed door with 12mm thick TOUGHENED glass, all sides edge polished to be fixed on patch fittings of the approved make. Cost of the door to be inclusive of pre-approved ozone make patch fitting, floor spring, patch lock, handles of 32 x 1300 matt finish, handles to be fitted horizontally / vertically as per instructions & patch fitting(s) lock(s), etc., all complete as per design & as per instruction of Engineer-in-Charge. | 9 | Sqm |
| 3 | Providing and fixing weld mesh partition cum door as per drawing. Weld mesh shall be 50x25 size, 3mm GTI wire and frame shall be 50x50x6 angle and flats of 40x6 flat. Further, the outer frame shall be 65x65x6 angle fixed to walls with hold fast makeup of 50x50x6 angle. The cost includes the cost of chipping walls , placing hold fast, grouting with 1:2:4 concrete, finishing , painting etc. also if any gap between angle frame & wall crossing, the same shall be covered by welding with 40x6 flats and filled with CM of plastering grade. The cost also includes one coat of red oxide and two coats of silver paint. The door shall be provided with aldrop (including type) for locking and tower bolt at bottom , cost of hinges, welding to main frame. Weld mesh shutter shall be made up of 50x50x6 angle and 40x6 flat, weld mesh of 50x25 aperture size and gauge of 3mm etc., at all heights & levels and as per instruction of Engineer-in-Charge. | 20 | Sqm |
| 4 | Providing & fixing of vertical fabric venetion blinds made of glass fiber fabrics in width 5"(or) 4" minimum overlaping of 3/4" in fabric. . Top aluminum anodised rail of 1.4mm thickness. 2 inch wide channel with front lamination of same fabric. runners having stainless steel hooks with built-in-shock spring and self aligning slip clutch. end control box composed of double gear system. stainless steel spacers. bottom with fully plastic covered link bead chain as per manufacturers specifications complete as per instruction of Engineer-in-Charge. | 50 | sqm |
| 5 | Supply & Grouting with specialised grout additives to the roof slab a) Drilling the holes 12mm or 14 mm dia to the required depth. b) Fixing the rubber nozzles with quick setting compound - RAPIDSTRONG QS (Armstrong)/ ZORIRAPIDAR (PMCC)/ POWER & QK SET (EBT)/ WATERSHILED QK SET cement putty as per directed by EIC. c) Grouting of holes with 140 PSI grout pump with cement slurry mixing with specialized free flow, Non- shrink grout additive- RAPIDSTRONG GROUT ADMIX / ZORIGROUT GP1/ POWER & GROUT ADMIX (ARMSTRONG/ PMCC/ (EBT)/WATERSHIELD AR+Cement as per instruction of Engineer-in-Charge. | 250 | No's |
23 Days Left