Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3968884 |
|---|---|
| Organisation Name | National Highways And Infrastructure Development Corporation Limited |
| Tender Brief | Corrigendum : Emergent Maintenance Of The Existing Road Of The Project Improvement Of Existing Road To 2 Laning With Hard Shoulders Of Maram Peren Section Package 2b From 56.840 Km To 75.000 Km At The Risk And Cost Of The Epc Contractor |
| Last Date For Submission | 9th Jun, 2026 |
| Opening Date | 10 Jun, 2026 |
| Document Cost | 11800.00 |
|---|---|
| EMD | 55599.00 |
| Estimated Cost | 5559972.00 |
| City | Imphal |
|---|---|
| State | Manipur |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. | 214.06 | Cum |
| 2 | Prime Coat on WMM Providing and appllng primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical mean | 1712.50 | Sqm |
| 3 | Tack Coat on Grnaular Surface treated with Premier Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. | 1712.50 | Sqm |
| 4 | Dense Graded Bituminous Macadam Grading - II Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. i)For Grading II (19 mm nominal size) a) VG-40 | 119.88 | Cum |
| 5 | Tack Coat on Bitumionous Surface Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom | 1712.50 | Sqm |
9 Days Left