Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4195844 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair To Replacement Of 2 X 1.6 Mva 33/11 Kv Transformer And Connected Work Under Cwe Jabalpur |
| Last Date For Submission | 11th Jun, 2026 |
| Opening Date | 18 Jun, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 217000.00 |
| Estimated Cost | 14194000.00 |
| City | Jabalpur |
|---|---|
| State | Madhya Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply and fixing of new Air break gang operated switch, triple pole, mechanically operated out door with all fitting/ accessories mounted on and including 9 Nos. 33 KV porcelain insulator and steel channel frame Gi operating rod 25 mm dia of suitable length with operating mechanism worked from ground level horizontally operated rotating type with copper isolator as per site requirement including locking arrangement for operating handle complete suitable for current rating upto 400 Amps 33 KV complete all as specified and directed by Engr in charge. | 3.00 | Each |
| 2 | M&L for new lightning arrestor expulsion type complete with all fittings, transmision/ distribution class 65 KA, conforming to IS-3070 (Part-II) 1993 suitable for 33 KV system and mounting on poles including all necessary bolts, nuts and washers and making electric connection and testing on completion complete all as specified and directed. | 2.00 | Set of 3 |
| 3 | Taking down old unsv insulator any type any size | 87.00 | Each |
| 4 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron strip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40mm bore Gl pipe light grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore Gl medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS TMT bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-1 (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same Gl earth strip alongwith protection pipe and testing on completion complete all as specified and directed. Note: GI strip and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by contractor | 24.00 | Each Set |
| 5 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised wire 4mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40mm bore Gl pipe light grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore Gl medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS TMT bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-1 (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same Gl earth strip alongwith protection pipe and testing on completion complete all as specified and directed. Note: GI strip and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by contractor | 6.00 | Each |
6 Days Left