Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3895899 |
|---|---|
| Organisation Name | Jaipur Metro Rail Corporation Limited |
| Tender Brief | Corrigendum : Supply, Installation, Testing And Commissioning Of Led Lights In Replacement Of Old Conventional Lights At Msor, Namt, Smnr, Rmnr, Cljp, Mrsn, Sicp And Cdpe Metro Stations Of Jmrc |
| Last Date For Submission | 4th May, 2026 |
| Opening Date | 04 May, 2026 |
| Document Cost | 5900.00 |
|---|---|
| EMD | 263993.00 |
| Estimated Cost | 13199622.00 |
| City | Jaipur |
|---|---|
| State | Rajasthan |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Surface and heavy duty type Batten Supply of 4 feet, ceiling or wall mounted, SMD LED batten of 20W LED luminaire (i) System efficacy :- Min. 120 lm/W, (ii) operating in ambient temperature :-- 0 C to 45 C . (iii) Luminaire shall be made up of extruded anodised aluminium housing with polycarbonate high transmissivity diffuser, ensuring uniform illumination glare free lighting, excellent heat dissipation, high durability, scratch resistance and non-rusting features. LEDs used in the product complies with IEC 62471 for Photo-biological safety. With screwless design,. Luminaire shall have FR4 PCB and its LED Driver shall be of Integrated type prewired in product housing, Isolated (iv) IP40 with stainless steel mounting clamps. (v) LED:- LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. (vi) Burning Hours:- L70 life of 50000 burning hours tested at maximum current. (vii) CCT:- 5700 K (viii) CRI :- minimum 80 with MacAdam CCT binning < 5. (ix) Constant Current with range:- 150-270V AC with internal surge protection of 2.5Kv. (x) Driver of Efficiency > 85%, (xi) Power factor of minimum 0.95 (xii) harmonic distortion (THD) less then 10% Manufacturer shall have inhouse lab approved by NABL . LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. | 447 | Nos. |
| 2 | Surface and heavy duty type Supply of 4 feet, ceiling or wall mounted, SMD LED batten of 40W LED luminaire (i) System efficacy :- Min. 125 lm/W, (ii) operating in ambient temperature :-- 0 C to 45 C . (iii) Luminaire shall be made up of extruded anodised aluminium housing with polycarbonate high transmissivity diffuser, ensuring uniform illumination glare free lighting, excellent heat dissipation, high durability, scratch resistance and non-rusting features. LEDs used in the product complies with IEC 62471 for Photo-biological safety. With screwless design, (iv) IP40 with stainless steel mounting clamps. . Luminaire shall have FR4 PCB and its LED Driver shall be of Integrated type prewired in product housing, Isolated (v) LED:- LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. (vi) Burning Hours:- L70B50 life of 50000 burning hours tested at maximum current. (vii) CCT:- 5700 K (viii) CRI :- minimum 80 with MacAdam CCT binning < 5. (ix) Constant Current with range:- 150-270V AC with internal surge protection of 2.5Kv. (x) Driver of Efficiency > 85%, (xi) Power factor of minimum 0.95 (xii) harmonic distortion (THD) less then 10% Manufacturer shall have inhouse lab approved by NABL. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. | 673 | Nos. |
| 3 | Recessed Integral, SMD 1x4 LED, IP 20, 40W LED Recess mounted fixture (i) System efficacy :- Min. 130 lm/W, (ii) operating in ambient temperature :-- 0 C to 45 C . (iii) Luminaire shall have satin finished translucence (HET) diffuser for Uniform illumination and wider light distribution. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall use SMD type LED. (iv) IP20 (v) LED:- LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. (vi) Burning Hours:- L70 life of 100000 Hrs tested at maximum current(Complete LM 80 test report for LED should be submitted for 10000 Hrs of Testing) (vii) CCT:- 5700 K (viii) CRI :- minimum 80 . (ix) Constant Current with range:- input voltage range of 150V to 270V (nominal rated voltage 240V) with 3 KV internal surge protection (x) Driver of Efficiency > 85%, (xi) Power factor of minimum 0.95 (xii) harmonic distortion (THD) less then 10% (xiii) Ripple less then 5% Driver shall be Multistage,Isolated type, constant current topology driver with proper heat sink for heat. Compliance to Indian Standards of IS10322 Part 5 / Sect 1:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. | 816 | Nos. |
| 4 | Supply & Fixing of Dry Powder Agent (as per IS 4308:2019), ABC type Fire Extinguisher (Stored Recessed Supply of SMD LED, 300 X 300mm IP 20, 24W Recessed downlighter (i) System efficacy :- Min. 100lm/W (ii) operating in ambient temperature :-- 0 C to 45 C . . (iii) Luminaire shall have aluminium pressure die cast housing in white with HET Diffuser. (iv) IP20 (v) LED:- LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. (vi) Burning Hours:- L70 life of 50000 burning hours tested at maximum current. (vii) CCT:- 5700 K (viii) CRI :- minimum 80.with MacAdam CCT binning < 7. (ix) Constant Current with range:- rated voltage of 240V with 3kV internal surge protection, Power factor of minimum 0.95 (x) Driver of Efficiency > 85%, (xi) harmonic distortion (THD) less then 10%, (xii) efficacy of minimum 80%. Driver Manufacturer shall have inhouse lab approved by NABL. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 | 25 | Nos. |
| 5 | Bulk head Supply of surface/wall mounted SMD LED bulkhead luminaire of 10W LED fixture (i) System efficacy :- Min. 100lm/W (ii) operating in ambient temperature :-- 0 C to 45 C . (iii) Luminaire shall be made up of pressure die cast aluminum housing powder coated in dark gray with polycarbonate high transmissivity opal diffuser, ensuring uniform illumination and excellent heat dissipation. LEDs used in the product complies with IEC 62471 for Photo-biological safety. Luminaire is with high quality silicon gasket of IP65 and IK10 protection . EMC/PCT package of wattage of 1-3 W LEDs used in the product shall comply with IEC 62471 for Photo-biological safety. (iv) IP65 and IK08Protection (v) LED:- LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. (vi) Burning Hours:- L70 life of 50000 burning hours tested at maximum current. (vii) CCT:- 5700 K (viii) CRI :- minimum 80 with MacAdam CCT binning < 7 mounted on 1 mm MCPCB with 35 micron cu layer.. (ix) Constant Current with range:- Constant Current with range 140-280V AC with internal surge protection of 2.5kV. (x) Power factor of minimum 0.95 (xi) harmonic distortion (THD) less then 10%, (xii) Driver of Efficiency > 80%, LED Driver shall be of Integrated type prewired in product housing, Isolated, Constant Current LED Manufacturer shall have inhouse lab approved by NABL. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. | 58 | Nos. |
8 Days Left