Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4895713 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair/ Maint Of Certain Toilets Blocks In Otm Area Under Ge (north) Binnaguri |
| Last Date For Submission | 6th Aug, 2026 |
| Opening Date | 08 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 86000.00 |
| Estimated Cost | 4300000.00 |
| City | Jalpaiguri |
|---|---|
| State | West Bengal |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same from site including roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed. | 400.00 | Sqm |
| 2 | M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC as per manufacturer's instruction in order to maintain proper slope over existing roof surfaces for applying, finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under relevant item of this schedule. | 400.00 | Sqm |
| 3 | M&L providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating in 4 coats of application as under:- (a) applying primer coat with Primer @ 0.3 kg /sqm (b) over priming coat applying applying single component acrylic polymer modified as manufacturer instructions with fibre reinforcement a width of approx 1m @ 0.75kg/sqm on the flat or vertical surfaces over parapet wall and ensure that there are no bubbles of creases. Overlapping of the fibre is a minimum of 50mm and allow this coat to dry for a period of 2-6 hrs depending on the atmospheric condition. (c) Applying second coat of roof guard @0.75Kg/sqm (d) Applying final coat of primer @ 0.08kg/sqm after 2nd coat has dried properly. Note : Water Proofing treatment shall be carried out by authorised applicator approved by the manufacturer. | 400.00 | Sqm |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed. | 625.00 | Sqm |
| 5 | M&L non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but n. exc. 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. | 105.00 | Sqm |
6 Days Left