| 1 | Construction of Pre-Fabricated Room 15 x 12 for Sub Division 2nd of M&H Division Jammu by way of Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50metres: All kinds of soil: &Ordinary Rock. Thesize of excavation 54 x 1.5 x 1.5 =221cft, dimensions of floor area/landing, and overall layout shall be as per site requirements and as directed by the Engineer-in-Charge.
Cement concrete Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size). The Size of cement concrete 54 x 1.5 x 0.5 =40.5cft.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 50 mm thick with 20mm nominal size stone aggregate. Thesize of cement concrete dimensions54 x 1 x 1.5 x 2 =162 cft.of floor area/landing, and overall layout shall be as per site requirements and as directed by the Engineer-in-Charge.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, 14 x 11 =154sft.
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.floor area 15 x 12 .
Providing, laying, compacting and finishing Reinforced Cement Concrete (RCC) stepof size5'-0" long 9" wide and required height, using M20 grade concrete (1:1.5:3) with machine mixed concrete, including centering, shuttering, reinforcement steel as per design, curing, finishing of exposed surfaces, and all labour, tools, tackles and materials required for complete execution of the work. Thesize of cement concrete dimensions of floor area/landing, and overall layout shall be as per site requirements and as directed by the Engineer-in-Charge
Providing labour, tools and tackles for cutting, trimming, clearing and removal of bushes, shrubs, undergrowth and low-hanging tree branches obstructing the proposed site for installation of a prefabricated room, so as to achieve a minimum clear height of 12 feet above ground level. The work shall include uprooting of bushes where required, collection of cut material, loading, carriage and disposal of all vegetation, roots and debris to an approved dumping site, complete in all respects, as directed by the Engineer-in-Charge.
Provided and fixing pre-fabricated structure by way of sheet structure for columns (96x48x3mm) trusses Purlins, rafter with wall plates. . Column Square Hollow PipeSection (70x70x3mm): The roof shall be provided 30mm thick puff insulated panellssintex, lloyd panel system/Jindal or equivalent make. The walls shall be made in sandwitch panels system using 2 No.s of Pre-coated /Pre-coloured sheets of 0.50mm fitted with 40mm thick puff with bulk density of 40 Kg/cum. The panels shall be inserted one by one into U-shaped ground track of size 52.5x35x1.25mm thick made from GI Sheet /Sheet coll. The window shall be made of power coated 14 guagealuminium section including 1 No Sliding door 3 X 7 feet with lock and key arrangement and 3 track windows 2nos (1m x 1m )and one window is having section size as per 1.5T window AC section shutter section as per required size with two track with clear glass door shall be made of power coated hinges door in aluminium section with 5.50mm thick floated glass pannel 6mm thick ACP Sheets as per direction of Engineer-in - charge, Providing and fitting of blind curtains-2Nos for windows, size as per size of the windows of approved quality Roller Blinds of reputed make such as MAC/D'Decor/Vista/NBT or equivalent approved by Engineer-in-Charge, consisting of polyester fabric, blackout/screen fabric as required, aluminium roller tube, side brackets, chain operation system and complete accessories.Complete clear height must be of 10 feet. Providingandfixing falseceilingwith12mmthickplain/ semiperforatedor withdesignceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides & edges, including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a gridmadeoutofanodizedaluminium(with15micronanodiccoating)T-sections35x15x1.5 mmsizemainrunners,crossrunners23.5x19x1.5mmfixedtomainrunnersplaced600mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia. M.S rod fixed to roof slab by means ofceilingcleats anddashfastener..Thesuspenders shall beplaced600x1200mmcentreto centre including fixing to the frame with C.P brass screws and applying a priming coat of primer and paint and provision of partition of the shed as per Direction of Engineer Incharge. The job includes provision of drain pipe from open end to the existing drain pipe.Quantity=(15 x12 )=180Sft. Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)withwaterabsorptionlessthan0.08%andconformingtoIS:15622ofCPWD approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand)includinggroutingthejointswithwhitecementandmatchingpigmentsetc.completeof size 600x600mm.
Floorarea=(15 x12 )=180Sft
Complete electrification of Shedalong with accessories which includes copper wire 1mm/1.5mm/2.5mm, PVC batten, PVC box + modular sheet, socket 6A, switches 6A-3No 6A switch boards, socket 16A, switches 16A, 2No-16A switch board, Ceiling Fan -2No, Havels power indicator, Blankswitch,LED Batten 20W 4 No light/Tube lightGIclamp,PVCgatti&screws,serviceline16mmAl,MCBboxdoubledoor,MCB16A,SPN63A, Button holder-2No, Providing of 1No exhaust fan with window shutter Providing of main cable of required size for power supply along with conduiting clamping and fittingsfrom Main control Panel to the room/PVC tape rolls as per Direction of Engineer Incharge.
Job includes cost of Labour engaged for site clearance and removal of disposal from sites as well as civil work at site. Cost of Carriage of material by mechanical transport including loading/unloading and stacking at site.
| 1.000 | complete job |
