Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4613995 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Ca No Cweafj-15/2026-27 Repair/maintenance Of 33kv Power House Eqpt, Calibration, Transformer Oil, 33kv Ug Cable And Allied Works At Af Station Jammu Under Ge (af) Jammu |
| Last Date For Submission | 11th Jul, 2026 |
| Opening Date | 13 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 66000.00 |
| Estimated Cost | 3300000.00 |
| City | Jammu |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply and fixing of 11KV HT LBS panel, 630Amps, 26.3KA with Fuse trip, Earth Switch, Dynamic mimic arrangment, 230V AC Shunt trip Coil and 2 No + 2 NC Aux Contacts, outdoor unit fabricated out of 3mm thick CRCA steel enclosure suiitable for outdoor unit type installation with MS base Channel. The panel contains the equipments & components complete with aluminium busbar interconnections, designation labels caution notices, EB sealing and pad locking facilities whereever required. Plateform for LBS panel plinth of size 2x2x0.6 mtr height from GL including excavation anmd earth work in trenches in any type of soil, PCC 1:5:10 type E-2 for foundation, brick work in cm 1:6 PCC 1:2:4 as in coping, plaster of 10mm thick in CM 1:6 on brick surface and necessary space is provided for entry of HT cables from bottom through detachable gland plates. The panels is finished with powder coated paint-siemens Grey Ral 7032 and the panels is consiting of following accessories complete all as specified and directed. (a) On load Break switch with fuse trip mechanism, 3 phase, 630A -1 No. (b) HRC Fuses with tripping striker pin, 11KV,Suitable Amps-03 Nos (c) Copper Busbar 50x12mm, Suitable rating, 3P, air insulated with colour coded RYB Heat shrinkable sleeves. (d) Earth bus 40x6mm aluminium bus bar (e) Busbar supports Resin Cast Note:- Drawing of LBC shall be got approved from GE. | 1.00 | Each |
| 2 | S&F of cable jointing kit for 33 KV (Earthed) grade cable for out door end termination Heat shrink type joint complete with jointing material and accessories suitable for single core XLPE armoured Al conductor cable of size 300 sq mm and entire satisfaction of Engr-in-Charge complete all as specified and directed . | 8.00 | Each |
| 3 | S&F of cable jointing kit for 33 KV (Earthed) grade cable for straight through joint heat shrink type joint complete with jointing material and accessories suitable for single core XLPE armoured Al conductor cable of size 300 sqmm and entire satisfaction of Engr-in-Charge complete all as specified and directed . | 2.00 | Each |
| 4 | Supply, testing and laying XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor 33000 volts (Earthed) grade of size 300 sqmm single core complete all as per Engr-in-charge. Note:- Existing cable under the Aircraft landing Zone, hence cable not catered in Sch of credit. | 540.00 | RM |
| 5 | Labour for drilling hole under the aircraft landing area with the help of drilling machine(HDD) without damaging/distrubing the MAFI lights/cable horizontally for aircraft landing area crossing in and including HDPE pipe 160mm dia, SDR 13.6 (8Kg/SQCM) 145.04 PSI pressure pipe for cable protection complete all as specified and directed. Note:- Driling of hole under the road 2 to 3 mtr depth and Minimum one slot length 5mtr before drilling signal cable clearance should be received from signal Unit. During the drilling any type of cable damage, the same shall be repaired by contractor without any extra cost. | 460.00 | RM |
6 Days Left