| 1 | Supplying Installation Testing and Commissioning of 2 MP IP IR Dome Camera having following specifications, type of lens and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: >50 dB, Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night
condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation Multi zone Privacy Masking, HLC, Digital Watermarking. 3) Compression (Minimum):-Video:- H.265 or better, H.264H, H.264, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723
4) Wide Dynamic Range:- WDR (120db or more)
5) Digital Noise Reduction:- DNR (3D) On/Off
6) Video Streaming & Frame Rates :- Triple streaming , configurable (Main stream: 2MP (1920
1080)@25/30 fps,Sub streams minimum: 720P@25/30 fps).
7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion,
Motion Detection
8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, syslog, video encryption, IP/MAC filtering, HTTPS, trusted upgrade, trusted boot.
9) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. | | |
| 2 | 10) Recording Management: Format SD, overwrite, storage management, video to NAS device
11) Alarm Trigger : Motion/tampering detection; audio detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection
12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast
13) System Capability: ONVIF, Camera shall support open source VMS
14) Ethernet: 1 RJ 45 10/100 Ethernet port
15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement.
16) Power Input: The camera should support simultaneous dual power input 12 VDC (via power adapter) and PoE (802.3af) to ensure continuous operation in the event of a failure in one power source.
17) Power Requirement: 12VDC/24 VAC/PoE (802.3af)/ePoE
18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body
19) Operating Condition:- Ambient Temperature:- (- )05 C to 50 C, humidity 95% (max) (non-condensing)
20) IR life: 40000 hours or higher
21) Video Bit rate: 32 KBPS - 8 MBPS or better
22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS
2MP (@ 25/30fps@1080P (1920 1080)) IP IR Dome
Camera with 2.8/ 3.6mm fixed lens | 18.00 | Nos. |
| 3 | Supplying Installation Testing and Commissioning of PTZ (Pan,Tilt and Zoom) IP IR Camera having following spcifications and features etc : PTZ (Pan,Tilt and Zoom) IP IR Camera having following spcifications and features etc :-
1) IP IR PTZ Camera: Motorized PAN TILT ZOOM with IR
2) Image Sensor: 1/2.8" or better progressive Scan CMOS
3)Signal System: PAL/NTSC
4) Minimum Illumination: 0.008 Lux@ F1.6, AGC ON,, 0 lux with IR, or better
5) Imaging: 1/1s to 1/30000s, Auto Gain Control , White Balance- Auto, Back Light Compensation, Image Rotation, Multi zone Privacy Masking (Upto 24 Area), HLC, Defog, Region Of Interest and EIS features.
6) On Screen Display: Camera should display Camera title, Date & Time in live & recorded video both.
7) Signal to Noise Ratio: > 50 dB
8) Event Notification: Through Relays, E-Mails or FTP
9) Day & Night: True Day & Night High Performance
Mechanical IR cut filter with auto switch, IR SourceInbuilt IR LED's with effective distance. The camera should have IR LED s and cover distance up to 300
meter or above
10) Auto Tracking: The camera should be equipped with Deep-learning-based auto tracking function using simultaneously all of the panning, tilting and zooming should be available. When a motion is detected in a registered monitoring area, the camera should track
the motion (object) and capture it.
| | |
| 4 | 11) Pre/Post Event Buffering: The camera should support atleast of 5 seconds of pre & post event buffering.
12) Presets: 300 Presets
13) Video Compression (Minimum): H.265 or better, H.264, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723
14) Wide Dynamic Range: WDR (120dB or more), HLC & BLC
15) Digital Noise Reduction: DNR (2D+3D) On/Off
16) Image Setting: Rotate Mode, ROI ,EIS, Defog, saturation, brightness, contrast, sharpness adjustable through client software or web browser
17) Profile Management: User configuration import, export
18) Cyber Security: Configuration encryption, AES 256-bit Encryption, Digest, account lockout, video encryption, IP/MAC filtering, trusted boot, trusted upgrade, trusted execution
19) Onboard Storage: Camera should support built in Micro SD/SDHC/SDXC Card slot upto 512 GB . It should be supplied with minimum 128GB Memory.
20) Recording Management: Format SD, overwrite, storage management, video to NAS device, remote archive access via FTP login
21) Edge based Video Analytics & Alarm Trigger: Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection, Tripwire, Intrusion, Object Abandon/ Missing, SMD, Face Detection
| | |
| 5 | 22) Network Protocol: SFTP, IPv6, IPv4, DNS,NTP, HTTP, HTTPS, SNMP, TCP/IP, PPPoE, NFS, ICMP, DHCP, SMTP, RTSPS.
23) System Capability: ONVIF Profile S, G & T. CCTV Camera OEM should be fulltime member of ONVIF and quoted models should be listed on ONVIF official website (All the certifications & Credentials should be valid on the date of technical evaluation).
24) VMS: Camera shall support open source VMS
25) Connectivity: 1x LAN RJ-45 (10/100Base-T)
26) Audio Support: Audio Interface : The camera should have 1/1 Audio In/Out to connect External Mic and Speaker Audio Compression : PCM, G.711U/A, G.711MU, G.726, MPEG2-Layer2, G.722.1
27) Alarm In/Out : Alarm In/out- 7/2 Ch In/Out
28) Power Input: The camera should support simultaneous dual power input DC/ AC (via power adapter) and PoE (802.3af) to ensure continuous operation in the event of a failure in one power source.
29) Power Requirement: 24 VDC, 2.5 A ( 25%), PoE+ (802.3at)
30) Enclosure & Weather Proof Standard: IP67 weather proof and IK10, TVS 8000V lightning proof, surge protection, voltage transient protection
31) Operating Condition:- Ambient Temperature:- (-)05 C to 50 C, humidity 95% (max) (non-condensing)
32) IR life: 40000 hours or higher
33) Video Bit rate: 32 KBPS - 8 MBPS or better
34) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS
2 MP IP IR motorized PTZ @ 25/30fps or better camera, Triple streaming , configurable on resolution Main stream: 1080p@25/30 fps Sub streams :1080p@25/30 fps & D1@25/30 fps or better, varifocal lens 4.3-137 mm or better with Automatic & manual Focus Adjustment provisions, 32x Optical zoom and 12x Digital zoom with angle of view 57 2.4 , PAN Travel: Pan: 0 ~ 360 endless,Manual Pan: 260 /s, Preset : 300 /s, Tilt, Travel: Tilt: -20 ~
90 , auto flip 180 , Manual Tilt: 120 /s, Preset : 200 /s | 2.00 | Nos. |
