Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4940591 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Corrigendum : Renovation /alteration Of Rooms Housing X-rays Machines, Shifting Of X-rays Machines And Change Of Entry Path For Males And Females At Rear Gate Civil Secretariat Jammu. Cno-96 Np |
| Last Date For Submission | 21st Jul, 2026 |
| Opening Date | 22 Jul, 2026 |
| Document Cost | 600.00 |
|---|---|
| EMD | 20000.00 |
| Estimated Cost | 1000000.00 |
| City | Jammu |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Detailed Item attached at Page no-16 of e-NIT. Providing and fixing of prefabricated structrure made up of structural steel and polyurethane foam pannels in walls with attached general washroom on ground floor. The prefabricated double storey structure shall be made up of structutal steel and PUF pannels, prepainted coloured profile steel sheets with all design parametres in compliance to all relevent latest codes of design for steel and concrete structure and shall be inclusive of all sub items given below:- The main and partition walls shall be made up of 50mm thick polyurethane foam pannels which shall consists of wall pannels manufactured in sandwitch panel system using two nos. of precast/precoloured steel profile sheets of 0.50mm thickness fitted with 50mm thick insulation of Polyurethene foam (Density 40 KG + 2 kg/cum). The wall panels will be provided with tongue and grooves joint and will be cam lock system for interlocking. All materials required for the manufacture of shelter will be new and shall comply with relevant Bureau of Indian Standard Specifications. The brand of PUF wall panels shall be got approved by the E.I.C. Windows and Ventilators :- Windows shall be made up of three track powder coated Aluminium Sliding window ( of minimum 10 gauge sections having 5 mm thick float glass panes fixed on two leaves and one leaf shall be provided with fixed flyproofing using stainless steel mesh of 1.5 mm aperature). Doors/Shutters :- 35 mm Thick flush door shutters with necessary locking arrangement of approved brand godrej/Harrison stainless steel towerbolts, handles shall be provided with appropriate 10 gauge Aluminium profile sections including all necessary fittings and fixtures. False Ceiling :- Providing and Fixing of false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from MS sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277. The ceiling system is to be fixed to the concealed GI frame work which shall be suspened from the truss member/ roof with all necessary arrangements. Detailed Item attached at Page no-16 of e-NIT. The false ceiling shall be made up of calcium silicate /gypsum board tiles of size 600 x 600 mm and 8 mm thick with provision for lights. The roofing shall be provided with 0.5 mm thick pre coated steel profile sheets supposed on purlins/designed steel structural truss with provision of adequate rain water drain/pipes. The minimum prjection all around the roof should be 600mm. The sheets shall be fixed using hot dip zinc coated self drilling hexagonal washer head fasteners. the steel sheet shall be laid with minimum end and side lap of 150mm. Eaves boarding of 150mm height shall be provided with necessary frame work all around the roof structure. Eaves boarding and soffit shall be provided with ACP sheet 4mm thick over necessary frame work. Cable End :- Cable end will be covered with same puf panels as of wall upto bottom chord of truss. The triangular truss portion shall be covered with 0.50 mm thick precoated steel profile sheets. Sunshades:- Suitable sunshades made out of prepainted coloured steel profile sheets with angle iron frames shall be provided to the external windows. the minimum projection of sunshaded shall be 450mm and 300 mm wider than the width of the opening. Under flooring :- The plain cement concrete 1:4:8 mix 100 mm thick shall be laid using crushed stone aggregate of 40mm nominal size. Detailed Item attached at Page no-16 of e-NIT. Cement concrete flooring 50mm thick shall be provided using cement concrete 1:2:4 mix. All steel members will be provided with 2 coats of red oxide zinc chromate primer before fabrication. The complete cement concrete flooring of 1:2:4 mix , electrification, painting work hwnever required and internal sanitary works as required and approved by Engineer in charge shall be provided. Fasteners and Fittings :- The fastners and fittings for prefabricated structure shall be as per approved/vetted structural design and shall conform to relevant specifications. Finishes :- All structural steel member shall be applied two coats of red oxide zinc chromate steel primer of apporoved brand and thereafter shall be painted with two coats of synthetic enamel paint. | 300.00 | sft |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for | 16.99 | cum |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | 1.91 | cum |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 0.88 | cum |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1 :3 (1 cement :1 coarse sand: 3 graded stone aggregate 20 mm nominal size) | 6.22 | cum |
2 Days Left