Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4612891 |
|---|---|
| Organisation Name | Power Development Department |
| Tender Brief | Corrigendum : Renovation Of Residential Quarters At Pdd Complex Janipur Jammu And Renovation Of Md Jkptcl Office Including Construction Of Bathrooms And Other Allied Works At Janipur Jammu Falling Under The Jurisdiction Of Tlmd-i, Jammu. |
| Last Date For Submission | 13th Jul, 2026 |
| Opening Date | 14 Jul, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 60000.00 |
| Estimated Cost | 0.00 |
| City | Jammu |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Renovation of Residential Quarters at PDD Complex Janipur Jammu and Renovation of MD office including construction of bathrooms and other allied works at Janipur Jammu (2Nos staff Quarters) | ||
| 2 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured | 140.000 | Sqm |
| 3 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.second class deodar wood | 16.720 | Sqm |
| 4 | provding and fixing wire gauge shutters using galvanized M.S wire gauge of avg. width for aperture 1.4 mm in both directions for doors, windows, etc with necessary screws as per direction. Second class deodar wood | 25.820 | Sqm |
| 5 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, incl. panelling, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 9.6.1 Second class deodar wood | 18.210 | Sqm |
6 Days Left