Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5002979 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair/replacement Of Old Unsv Tanks With Sheet Molding Compound (smc) Thick Insulated Panel Tanks Along With Connected Items At Posts In Hill Sector At Bb Cantt, Srinagar. |
| Last Date For Submission | 14th Aug, 2026 |
| Opening Date | 21 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 99950.00 |
| Estimated Cost | 4997000.00 |
| City | Jammu |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supplying and fixing of SMC/GRP panel tank for water storage as confirming with IS 14399: 1996 (Par I & II) and IS 4249:1967 for fire retardant and NSF UK tested required capacity of suitable size including fixing and assembling / erecting the tanks. Base Frame Grillage for tanks as per suitable for tank size and capacity. Made out from M.S. Channels / beams with anticorrosive paints / HDG coating, complete fixing and fabrication in the scope of suppler. The tanks to be leak proof after installation and having following specifications. Standard Insulated Grey colour SMC Panels Hot pressed moulded UV stabilized made from Sheet Moulding Compounds (SMC) composing of glass fibre and formulation. The SMC panel & accessories specification are as follows :- | ||
| 2 | SMC PANELS :- (i) Made by Hot Pressed Process moulded 25mm PUF Insulated (ii) Bottom Panel SMC Panel - 1000 x 1000 x 70mm, Convex Shape (iv) Drain Panel & Outlet Panels SMC Panel - 1000 x 1000 x 70mm Special design for complete drain (v) Side Panel SMC Panel - 1000 x 1000 x 70mm, 1000 x 500 x 70mm (vi) Ceiling Panel SMC Panel - 1000 x 1000 x 70mm (vii) Manhole SMC Panel - 1000 x 1000 x 70mm with 700mm x 700mm locable lid. (viii) Thikness of the Panels As per IS 14399 (Part I & II) Min 4mm to 10mm | ||
| 3 | SPECIAL ACCESSORIES :- (i) Corner Frame : HDG Steel Vertical Corner Angle at Four Corners (ii) Sealing Tape Non Toxic : 3mm thick with high level of resistance to ageing and superior recovery from compression (Make : Norseal by Saint Gobain) (iii) Steel Bolts for Panel Joints : HDG Steel Nut-Bolts M12 x 40mm 8 nos. pe side. (iv) Air Vent - PVC : Air Vent dia 100mm with insect proof mesh in side. (v) Inlet/Outlet/Overflow/Drain : G.I. Flanages with 9 Long Nipple 50NB each. (vi) External Reinforcement : ISI marked C channel at every 1-meter except in the corner of steel with anti-corrosive paint and it is tie with top external tie rods. (vii) Water Level Indicator : Transperent tube type with Alu. Body (viii) Internal Roof Supports : FRP Square Hollow section for Roof Supports 50x50x5mm. (ix) Ladders : Exteranl ladder with wall mounting arrangement. Internal ladder FRP. (x) Connection fixing Inlet, Outlet, Overflow & Drain 50NB (as per Table D - BS10) G.I. Flange type with 9 long thread end Nipple (xi) Base frame Grillage with Pedestal : Made out from M.S. Channels / beams with anticorresive paints. | ||
| 4 | The tank after erection and assembled as per Manufacturer Specifications shall be filled with water upt o overflow level, overflow pipe shall be placed near the roof of the tank and test for leakage should be done, if any leakage found during the testing or during the maintenance period, it should be rectified to make it 100% leak proof including taking down old UNSV tanks and removing the existing inlet/out connection after refixing with new tanks complete as per direction of Engineer in charge. Note : The quoted rate for tank is inclusive of excavation and PCC/RCC foundation of suitable size as per manufacturers recommendations complete all as specified and directed. | ||
| 5 | 20 KL of size 5.0m (L)X2.0m (B)X2.0m (H). | 1.00 | EACH JOB |
6 Days Left