Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4857262 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Replacement And Renovation Of Civil Works (repairs To Existing Control Room Building/offices/sub Division/division Complex) Jammu (under M.h-capex (pddss2324100244) Jpdcl Jammu |
| Last Date For Submission | 14th Jul, 2026 |
| Opening Date | 15 Jul, 2026 |
| Document Cost | 600.00 |
|---|---|
| EMD | 28480.00 |
| Estimated Cost | 1424000.00 |
| City | Jammu |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Demolishing mud phaska in terracing and disposal of material within 50 meters lead. | 116.63 | Cum |
| 2 | Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations.a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineerin-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineerin-charge. With average thickness of 120mm and minimum thickness at khurra as 65 mm. | 510.31 | Sqm |
| 3 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty. Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm). | 91.45 | Sqm |
| 4 | Engaging Electrician as per requirement of site. | 10.00 | Nos. |
| 5 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 200x10 mm. | 100.00 | Each |
7 Days Left