Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4364778 |
|---|---|
| Organisation Name | University Of Jammu |
| Tender Brief | Supply And Installation Of Indoor Type Lt Panel With Switch Gears In Home Science Department At New University Campus University Of Jammu |
| Last Date For Submission | 2nd Jun, 2026 |
| Opening Date | 04 Jun, 2026 |
| Document Cost | 708.00 |
|---|---|
| EMD | 4481.00 |
| Estimated Cost | 224050.00 |
| City | Jammu |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Part-A (Sanctioned Schedule items) Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Make Anchor /Havells /HPL Equivalent make of required specification to be approved by the Engineer In charge) i. 100 AMP 16kA TP MCCB | 5 | Each |
| 2 | ii. 400 AMP 50kA FP MCCB | 1 | Each |
| 3 | Supplying and fixing of following sizes of medium class PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required- ISI Marked Anchor/High Power /AKG/) Equivalent make of required specification to be approved by the Engineer In charge 25 mm dia | 20 | Mtr |
| 4 | Wiring for circuit/sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. (Wire Make ISI Marked Havells/Anchor/KEI/Plaza/polycab Equivalent make of required specification to be approved by the Engineer In charge ) i. 4x10 +2x6 Sq mm | 80 | Rmt |
| 5 | Part-B (Non-Schedule items) Design, manufacture, testing at works & supply, installation, testing & commissioning cubicle panel floor mounted (on base frame) totally enclosed and extensible type . The general construction shall comprise to IS 8623-93. The design shall include all provisions for safety of operating and maintenance personal. IP 42 for indoor and IP54 for outdoor, shall be compartmentalized type having space and arrangements for I/C. cable/bus ducting/incoming switch gears, bus couplers, insulated and properly supported compartmentalized switch gear, outgoing compartmentalized switch gear, bus bar support and terminations, interconnection between bus bars & switch gear with auxiliary bus bars/ insulated conductors/strips etc. (Make Electric Field/ Bharti Engineers/Gupta & Friends/ Jai maa/KED) MAIN L.T PANEL a. INCOMING Space for 1 No. 400 Amp 4 pole MCCB of 35 KA SPace for 1 no. 200Amp Changeover Switch b. INDICATING PANEL The indicating panel of the incomer shall be provided with the following: i. Ammeter of required range with ASS, CT's. ii.Voltmeter of required range with VSS. c. OUTGOING Space for 1 No. 400 Amp TPN Al. Bus bar of equal cross section for power load/light load. Space for 7 No. 100 Amp 4 pole MCCB of 16 kA Dimensions 6 0"x4 0"x1 6 | 36 | cu.ft |
1 Days Left