Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5017494 |
|---|---|
| Organisation Name | Rural Development And Panchayati Raj Department |
| Tender Brief | Upgradation Of Panchayat Ghar Meen Charkan Pyt Meen Charkan Block Bari Brahmana Under Scheme Capex-ddc |
| Last Date For Submission | 30th Jul, 2026 |
| Opening Date | 31 Jul, 2026 |
| Document Cost | 600.00 |
|---|---|
| EMD | 7840.00 |
| Estimated Cost | 392000.00 |
| City | Jammu |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. | 223.05 | sqm |
| 2 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge Powder coated aluminum (minimum thickness of powder coated 50 microns) for Fixed portion | 10.00 | kg |
| 3 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, 22.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required Powder coated aluminum (minimum thickness of powder coated 50 microns) | 7.00 | kg |
| 4 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge | 2.23 | sqm |
| 5 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. 22.3.1 With floating glass panes of5.0 mm thickness (weight not less than 10.00 kg / sqm) | 2.23 | sqm |
9 Days Left