Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4035926 |
|---|---|
| Organisation Name | Public Health Engineering Department |
| Tender Brief | Habri- Water Supply Scheme For Installation Of 1 No. New Tubewell Against Abandoned Tubewell No. 6 (due To Excess Nitrate As No 3 Found(107.88 Mg/lt) At Village Habri Tehsil Pundri And District Kaithal |
| Last Date For Submission | 24th Apr, 2026 |
| Opening Date | 24 Apr, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 19500.00 |
| Estimated Cost | 975095.00 |
| City | Kaithal |
|---|---|
| State | Haryana |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Inspection of tubewell with Geo Scanning borehole camera with display and data recorder to find out the fault and submission of suggestions regarding rectification of same to obtain the sand free water at site Including Transportation, Lodging, and Boarding. Detailed Analysis with Videography and Submission of Report, Video and also verifying the depth/ position of assembly complete in all respect to the satisfaction of Engineer-in-charge. | $1.000 | Job |
| 2 | Development of t/well by Over-pumping unit having suitable submersible pump for development of tubewell to ensure sand free discharge. All the equipment including POL and labour required for carrying out pumping tests but not limited to the following shall be arranged by the contractor at his own cost complete in all respect to the satisfaction of Engineer-in-charge: i) A suitable pump and prime mover (since power is not available at the well site). ii) Measuring devices for time, discharge and V-Notch orifice method water level recorder (digital water meter recorder/ steel tape engraved). iii) The contractor shall collected water sample in the presence of SDE/JE. This water samples should be handed over to PHED for further chemical analysis in Public Health Lab. | $1.000 | Per job |
| 3 | Providing clay seal of thickness 4.0 mm or above consisting of balls of local lay or bentonite mud to be placed in the annular space around the assembly the clay seal should be provided at a level of minimum 25.00 m above the top most screens depending on the logging result. | $1.000 | Job |
6 Days Left