Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4140820 |
|---|---|
| Organisation Name | Indira Gandhi Centre For Atomic Research |
| Tender Brief | Corrigendum : Retrofitting Works For Pif-i Building In Igcar, Kalpakkam. |
| Last Date For Submission | 26th May, 2026 |
| Opening Date | 28 May, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 13280.00 |
| Estimated Cost | 664000.00 |
| City | Kalpakkam |
|---|---|
| State | Tamil Nadu |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Earthwork excavation by mechanical means (Hydraulic excavator) for foundation, substructures, plinth beam, cess pits & trenches, all kinds of foundation etc., in all types of soil like hard gravelly soil, sandy soil for the following depth from average ground level upto the required founding level, line and grades in both dry and wet conditions including shoring, strutting, bailing out of water if necessary, levelling and ramming the bottom of trenches, dressing of sides, stacking the excavated materials away from the edge of trenches, refilling the sides of foundation as required with selected excavated earth and depositing / disposing the surplus excavated earth (Disposed soil to be leveled by breaking clods, if any and neatly dressed and leveled) within the lead specified below all complete as per specifications and as directed by the Engineer-in-Charge. | ||
| 2 | All kinds of soil with depth upto 1.5m below average Ground level and disposing surplus excavated earth upto a lead of 50 metres. | 50 | Cu.m. |
| 3 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-in-Charge for the following. | ||
| 4 | Upto 25mm average thickness | 80 | Sq.m. |
| 5 | Cleaning of reinforcement from rust from the reinforcing bars of following diameter to give it a total rust free steel surface by providing and using chemical rust remover of Cera Rust remover/Fosroc Reebaklens RR/Sika Rustoff-100 or approved equivalent make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-in-Charge. |
11 Days Left