Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4243712 |
|---|---|
| Organisation Name | Bidhan Chandra Krishi Viswavidyalaya |
| Tender Brief | Roof Treatment To Stop Leakage At North Block, South Block, Auditorium Hall And Conference Hall-i Of Facc-lake Hall, Kalyani Under Bckv, Mohanpur, Nadia |
| Last Date For Submission | 25th May, 2026 |
| Opening Date | 27 May, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 21819.00 |
| Estimated Cost | 872770.00 |
| City | Kalyani |
|---|---|
| State | West Bengal |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height & in any floor incl. removing rubbish within a lead of 75m as directed. | 40.00 | m2 |
| 2 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in first floor as per relevant IS codes. Pakur Variety | 0.10 | m3 |
| 3 | Taking out old damaged tarfelt from the roof, parapet etc. preparing the roof surfaces by removing all spoils, blisters, moss etc. from the working site and disposal of the same beyond the compound and cleaning the site in all respect as per direction of Engineer-in-Charge. All floor | 1482.00 | m2 |
| 4 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar incl rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. [Excluding cost of chipping over concrete surface] With 1:6 cement mortar - 15 mm thick plaster All Floor | 135.00 | m2 |
| 5 | Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo-fusible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.). Membrane Property: Softening Point > 150 deg C, Cold Flexibility < -6 deg C, Tensile Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength, N: 300 (longitudinal), 200 (transverse) | 1678.00 | m2 |
13 Days Left