Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4241569 |
|---|---|
| Organisation Name | Local Self Government Department |
| Tender Brief | Annual Plan- Proj No 304/25-26-general-mayyil Gp- Mullakkodi Ambedkar Gramam-mayyil Gp- Mullakkodi Ambedkar Gramam-general Civil Work |
| Last Date For Submission | 19th May, 2026 |
| Opening Date | 21 May, 2026 |
| Document Cost | 2760.00 |
|---|---|
| EMD | 50000.00 |
| Estimated Cost | 7650504.00 |
| City | Kannur |
|---|---|
| State | Kerala |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | CULTURAL CENTRE | ||
| 2 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 1.375 | sqm |
| 3 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 0.072 | cum |
| 4 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.072 | cum |
| 5 | OD493273/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Modified 12.50 ) | 63.000 | sqm |
7 Days Left