Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5776434 |
|---|---|
| Organisation Name | Rail Coach Factory |
| Tender Brief | Corrigendum : Supply Of Steel Sheet Of Size 15x2500x6400mm., As Per Drawing: Din En 10025-5 S355 J2w+n. Specification For Ultrasonic Testing Of Steel Plates Shall Be Astm-a-578(reapproved 2001). The Acceptance Standard Shall Be "level B" (para 8 Of Astm-a-578) With Frequency 100% (all The Plates Shall Be Ut Testing),scanning Shall Be Continuous Over 100% Of Plate Surface., Packing Instruction: Mild / Corten/ En Steel Coils, Sheets And Plates:- (a) Mild, Enand Corten Steel Sheets In Coil Form. The Coil Shall Be Protected In Reasonably Good Condition To Withstand Normal Handling Hazard During Transit With The Following Provision As The Barest Minimum: I) The Whole Coil Should Be Wrapped With Double Layer Of Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thickness. Ii) The Inner Edge Of The Coil Should Be Protected By Gi Ring Followed By Another Iron Ring. Iii) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Iv) Coil Should Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumference Of The Eye. V) Hot Rolled Coils Shall Be Supplied With Rust Preventive Oil Coating On The Outer Layer, Inner Layer And On The Both Edges. Vi) Coils Processed Through Pickling And Or Skin Passing Or Cold Rolling Of Thickness Upto 2mm Shall Be Protected Against Corrosion And Rust By Coating Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Waterdisplacing To Is: 1154 . Vii) Whole Coil Should Be Mounted On Wooden Blocks For Easy Lifting/ Stacking. Viii) The Sheets In Coil Form For Thickness 2mm And Above Shall Have: Inner Dia Of Coil 450-800mm Outer Dia Of Coil 1000-1300mm Weight Of Coil 2.4 - 10 Tonnes Ix) The Sheets In Coil Form For Thickness Below 2mm Shall Have: Inner Dia Of Coil 450-650mm Outer Dia Of Coil 1000-1300mm Weight Of Coil 5.0 - 10 Tonnes. (b) Mild, En And Corten Steel Plates/sheets. I) Plates Above 5mm Shall Be Supplied With Reasonable Packing With Metal Straping For Handling During Transit And Storage. Ii) The Sheets/plates Shall Be Supplied In Bundles With Double Layer Of Water Proof Paper & A Biodegradeable Plastic Sheet Of Suitable Thickness And Metal Protection In Edges.all The Sheets Upto 2mm Thckness Shall Be Protected Against Corrosion And Rust By Coating Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Waterdisplacing To Is: 1154 Andall The Sheets/plates Above 2mm Shall Be Protected Against Corosion & Rust With Suitable Mineral Oil Or Other Temporary Rust Preventive Coating. Iii) All Bundles Shall Have A Minimum Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid (wooden Packing Under Neath) To Facilitate Handling. Iv) Optimum Weight Of The Bundle Should Be 2mt+-10%. Mechanical Damange & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] |
| Last Date For Submission | 20th Nov, 2026 |
| Opening Date | Refer to Documents |
| Document Cost | 0.00 |
|---|---|
| EMD | 0.00 |
| Estimated Cost | 0.00 |
| City | Kapurthala |
|---|---|
| State | Punjab |
16 Days Left