Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4444417 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Formation Of Bituminous Internal Road At Icar Krishi Vigyan Kendra Campus, Karaikal. |
| Last Date For Submission | 8th Jun, 2026 |
| Opening Date | 09 Jun, 2026 |
| Document Cost | 1050.00 |
|---|---|
| EMD | 128438.00 |
| Estimated Cost | 6421911.00 |
| City | Karaikal |
|---|---|
| State | Pondicherry |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401of MoRTH specification, 4th Revision - by plant mix method for grading I material | 747.00 | 1 Cum (One Cubic Metre) |
| 2 | Providing , laying , spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layer by manual means in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density - Using vibratory roller | 498.00 | 1 Cum (One Cubic Metre) |
| 3 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. (As per MoRTH specification, 4th Revision). | 4975.00 | 1 Sqm (One Square Metre) |
| 4 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg. per sqm. on the prepared bituminous / granular surface cleaned with mechanical broom. (As per MoRTH specification, 4th Revision) | 9950.00 | 1 Sqm (One Square Metre) |
| 5 | Providing and laying dense graded bituminous macadam with HMP of capacity not less than 40 to 60 TPH using crushed aggregates of specified grading, premixed with bituminouse binder @ 4.0 to 4.5 per cent by weight of total mix and filler, tranporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achive the desired compaction as per Clause 507 of MoRTH specification, 4th Revision, complete in all respects - Using grade-II materials. | 153.00 | 1 Cum (One Cubic Metre) |
8 Days Left