Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4449447 |
|---|---|
| Organisation Name | Directorate Of Technical Education |
| Tender Brief | Purchase Of Equipments ( S.no 1 To S.no 5 ) For Ece Department |
| Last Date For Submission | 12th Jun, 2026 |
| Opening Date | 13 Jun, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 0.00 |
| Estimated Cost | 0.00 |
| City | Karaikudi |
|---|---|
| State | Tamil Nadu |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Purchase of Equipments | ||
| 2 | DSO (Digital Storage Oscilloscope) Bandwidth: 50 100 MHz. Sampling rate: 1 GS/s. Channels: 2 (minimum). Power supply: 100 240 V ac, 50 60 Hz. Automatic measurements: Vpp, Vavg, Vrms, frequency, period, Vmax, Vmin, rise time, fall time, +width, width, +duty, duty, etc. Horizontal scale: 5 ns/div 50 s/div or equivalent. Vertical resolution: 8 bits (2 channelssimultaneously). Vertical sensitivity: 1 mV/div 10 V/div (at input). Waveform math: +, , , , invert, FFT, etc. Waveform storage: 16 waveforms or equivalent. Communication interface: USB host and USB interface. Display: 7-inch color display or equivalent. Input impedance: 1 M 2% || 20 pF. Accessories: 2 passive probes (1X/10X) | 1.00 | Nos |
| 3 | 8051 MICRO CONTROLLER KIT Operating voltage: +5 V dc. Flash memory: 4 kB (AT89C51) / 8 kB (AT89S52). RAM: 128 bytes internal RAM. 16 2 alphanumeric LCD display. Push buttons / tactile switches. DIP switches for digital input. Inbuilt ADC interface: LDR, potentiometer. Inbuilt DAC interface. Inbuilt stepper motor driver with stepper motor. Inbuilt DC motor driver with DC motor. 1 4 LED array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 LCD display, 1 PWM driver. 1 hardware interrupt key, inbuilt RTC. Inbuilt EEPROM and UART module. 4 7-segment display. Supports both Assembly and C language programming. PC interfaceable. | 7.00 | Nos |
| 4 | EMBEDDED TRAINER KIT (USING LPC 2148) CPU - LPC2148, Core - 16/32 bit ARM7TDMI-S Speed - Max 60 MHz, Flash - 512KB, RAM (on- chip) 40kB, 46 General Purpose I/OPins, USB2.0 One 10bit A/D Converter with 14 Analog inputs, One 10bit D/A Converter, Six PWM & Watchdog Two UARTS (16c550), Two I2C (400Kb/s), Two SPI Eight Bit Digital Output, Eight Bit Digital Input,16x2 Characters LCD and 4x4 matrixkeypad One potentiometer for giving analog input, Relay & Buzzer Interface I2C Devices: RTC, EEPROM and Seven segment Display, On Board Stepper MotorDriver LM35 Temperature Sensor, One RS 232 Lines are Terminated at 9 Pin D type connector and USB interface Board has inbuilt power supply and mounted in sturdy cabinet Accessories USB cable with utility software to download programs from PC to target board Power Cord, User Manual | 5.00 | Nos |
| 5 | STRAIN GUAGE TRAINER KIT AC mains power supply: 230 V 10%, 50 Hz Metal foil strain gauge mounted on beam/cantilever. Strain measurement under applied load. Wheatstone bridge arrangement. Signal conditioning and amplification circuit. Instrumentation amplifiers with 3 digit display for strain / output voltage. Zero and gain adjustment controls. Provision for applying calibrated loads. Table-top trainer with labelled panel. Test points for signal measurement. Built-in DC power supplies and wooden closed cabinet. Supplied with patch cords and User manual. | 1.00 | Nos |
12 Days Left