Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5020943 |
|---|---|
| Organisation Name | Bharat Sanchar Nigam Limited |
| Tender Brief | Providing Pre-coated Gi Sheet Roofing To Prefab Bts And Dg Sets Under Kasaragod Division Of Bsnl Kannur Ba. |
| Last Date For Submission | 28th Jul, 2026 |
| Opening Date | 30 Jul, 2026 |
| Document Cost | 590.00 |
|---|---|
| EMD | 11335.00 |
| Estimated Cost | 566732.00 |
| City | Kasaragod |
|---|---|
| State | Kerala |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | ||
| 2 | Hot finished welded type tubes | 1250.00 | Kg |
| 3 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 280.00 | Sqm |
| 4 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : | ||
| 5 | Ridges plain (500 - 600mm) | 45.00 | Mtr |
7 Days Left