Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4917465 |
|---|---|
| Organisation Name | Rural Development And Panchayati Raj Department |
| Tender Brief | Corrigendum : Constt.of Cremation Shed At Thandapani Panchayat Baggan Upper-a,block Baggan |
| Last Date For Submission | 18th Jul, 2026 |
| Opening Date | 18 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 6000.00 |
| Estimated Cost | 300000.00 |
| City | Kathua |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth for 1 meter from cutting edge and disposal of surplus excavated earth as directed: | 11.21 | cum |
| 2 | Providing and laying in positiondry stone aggregate 40 mm nominal size) | 1.00 | cum |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 6.49 | cum |
| 4 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gram/m2 | 32.71 | sqm |
| 5 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 12.24.1 Ridges plain (500 - 600mm) | 6.71 | rmt |
Ending Today