Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4110625 |
|---|---|
| Organisation Name | Public Health Engineering Department |
| Tender Brief | Corrigendum : Deep Drilling Of 125 Mm Dia Bore Holes By Using Odex Method Including Providing, Installation, Testing, Commissioning Of Mark Ii Hand Pumps And Construction Of Platforms At (02 Nos) Different Locations In District Kathua On Turnkey Basis (epc) Under |
| Last Date For Submission | 19th May, 2026 |
| Opening Date | 21 May, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 19880.00 |
| Estimated Cost | 994000.00 |
| City | Kathua |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Deep drilling of 125 mm dia. bore hole as per the Strata encountered as per IS specification by using ODEX Method. | 120.00 | Mtr |
| 2 | The 125mm dia. M.S. Casing Pipe ISI marked having thickness of 5.4 mm conforming to as per IS 4270 / 2001 medium class (Part-I) 2004 Heavy C Class, electric resistance welded bevelled ended inside beed free pipes. All pipes from inside and outside with two coats of anti-corrosive paint of superior/approved quality. There should be no circumferential weld. The pipe from inside should be beed free having smooth finish. Each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with IS 4270/2001 with latest amendments. All the physical and chemical properties of pipe including tensile strength in accordance with IS 4270/2001 with latest amendments. | 120.00 | Mtr |
| 3 | Providing, fitting, installation, testing and commissioning of Submersible pump set of suitable parameters or depending upon the depth and discharge of the bore hole of reputed make conforming to relevant IS Code. The job includes erection of tripod stand and fixing of chain pulley block. Then lowering of submersible pump set in to the bore hole by way of providing and lowering of UPVC Pipe as per site requirement, submersible cable with fixtures such as rope, clamp, nuts, bolts & washers. Fabrication and fitting of well cap. Providing, fitting and installation of single-phase starter cum controller panel in sheet enclosure outdoor type conforming to IS standard. Providing and laying of 3 Core submersible cable, 2-Core PVC insulated conductor as service line required from LT Pole to starter panel of reputed make. Making of electrical connections with the starter panel, service line and submersible pump set after properly thimbling and testing and commissioning thereof. The job includes the cost of material and labour charges. Complete Job. | 1.00 | Job |
6 Days Left