Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4388876 |
|---|---|
| Organisation Name | Public Health Engineering Department |
| Tender Brief | Corrigendum : Replacement Of Worn Out Tank Portion Of Existing Steel Oht With Gfrp For Improving Water Supply To Lodgement Centers In Ward No. 10 And 11 Of Kathua Town Under Sanjy(ut Capex). |
| Last Date For Submission | 2nd Jun, 2026 |
| Opening Date | 03 Jun, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 64000.00 |
| Estimated Cost | 3200000.00 |
| City | Kathua |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Cutting Old tank of Capacity 136 KL including material for cutting and stacking the dismantled material at site. | 8643.26 | kg |
| 2 | Structural steel work in built up sections, trusses and framed work including cutting hoisting fixing in position all work as complete job | 5500.00 | Kg |
| 3 | Supply and placing in position SMC (Sheet Moulding Compound) panel tank for water storage (at any level) and for all leads and lifts of approved make as confirming with ISI 14399: 1996 and material to be confirming as IS 4249 :1967 for fire retardant., of size 5x5x4 and capacity 100 KL also including fixing & assembling the tank complete as per direction of engineer in charge. the tank to be leak proof after installation & having following specifications. Standard non- insulated SMC panels Hot pressed moulded UV stablised made from sheet Moulding compound (SMC) composing of glass fobre and formulation of selected resin. Size of panel shall be : Roof panel : 1000 x1000x 65 mm Side Panel : 1000 x1000x 75 mm /1500 x1000 x75/500 x1000x75 mm Bottom panel : 1000x1000x75 mm Drain Panel : 1000 x1000x 75 at bottom of complete drain of water Manhole panel dia: 700 mm lockable lidof hot pressed moulded made out of SMC. fasterners utilised for panel joints shall be of HDG bolts M12x40. External reinforcement C channel at every 1 meter of steelwith anti corrosive paint and it is tied with top external tie rods. Internal roof supports should be of FRP /GRP5 mm thick hollow square section. Air vent dia 100 mm with mosquito proof mesh insect proof. Aluminium body water level indicator with clear tube type and brass nozzle. Interla FRP Ladder with wall mounting arrangement inside. External GI ladder with complete fixing arranegment outside. complete fixing of inlet/outlet/overflow/drain should be Gi Flange type with 9"long nipple. | 1.00 | NO. |
| 4 | Fabrication of Old Steel for railing and walkway | 25.00 | KG |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. | 306.23 | Sqm |
2 Days Left