Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4121252 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Provn Of Stand By Diesel Generator Set 125 Kva For Pao (ors) Beg Kirkee Under Ge (central) Khadki. |
| Last Date For Submission | 26th May, 2026 |
| Opening Date | 28 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 38960.00 |
| Estimated Cost | 1948000.00 |
| City | Khadki |
|---|---|
| State | Maharashtra |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply installation and testing and commissioning of Eco friendly, diesel engine driven Generating of 125 KVA at 0.8 power factor 415 volts AC, 3 Phase, 50Hz, 4 wire directly coupled alternator and engine, fitted and aligned on common base platform with in built fuel tank with AMF panel and incluiding all excavation, PCC foundation (as per manufacture design), anti vibration pads dampers standard control panel as per manufacturer and all components shall be accommadated in enclosure and other accessories comprising of following. (A) Diesel engine : Eco friendly for emission and noise (CPCB NORMS COMPLIANCE) Diesel engine confirming to BS/IS standard developing 152 BHP@ 1500 RPM, engine is with electrict start, compression ignition, 4 strokecycle, Designed to run continously at 1500 RPM confirming to IS 10002,ISO-3046, BS-5514 standards. All Diesel engins are comply with latest CPCB norms. Make : Kirloskar Model :- 3R1190ENA 4GI or its equivalent make given under list of makes. The Diesel Engine are comprising of followings. Contd to 1.01 | 1.00 | Each |
| 2 | (Contd from,,....1.00) (B) ALTERNATOR :- Synchronous alternator suitable for continous operation rated at 1500 RPM,415 Volts. 0.8 PF, 50Hz, 3 Phase in SPDP Enclosure, self excited and self regulated, Brushless, 'H' INSULATION, floor mounted with antifrictin shielded ball bearing on end. The alternator confirms to IS 4722,BS EN 60034-1 Suitable for tropical conditions. Makes for Alternator : Kirloskar or its equivalent given under list of Makes . (C) BASE FRAME :- Suitable to couple above engine and alternator made from steel sheet metal. (D) FUEL TANK : 8 Hrs for continous running with diesel fuel inlet and outlet, Air vent and Drain Plug arrangements. (E) BATTERY : 1 No 12 Volts with lead. | ||
| 3 | Material and labour for earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified location), connected with galvanised steel earthing lead of 25x4 mm all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2 with pit cover, funnel, wiremesh, 32 mm dia light grade GI tubing for protection of GI strip 25x4mm, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion. | 4.00 | Each |
| 4 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of cables, pole foundation,stays etc and getting out in soft loose soil, complete all as specified and directed by Engr-in-Charge | 14.00 | Cum |
| 5 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engr in Charge . | 9.00 | Cum |
5 Days Left