Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4888264 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair To Road From Goc Office Gate Toward Vijay Dwar (pqc) Under Ge Khumbathang. |
| Last Date For Submission | 5th Aug, 2026 |
| Opening Date | 06 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 65900.00 |
| Estimated Cost | 3294000.00 |
| City | Khumbathang |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Demolition of cement concrete in ground floors and paving exc 15 cm thickness (below or above ground level) complete all as specified and directed. | 255.75 | CUM |
| 2 | M & L pavement quality concrete (PQC) of minimum 28 days field flexural strength 45Kg/ Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC-15, 2017, coarse aggregate of clean, hard strong, dense non-porous and durable pieces of crushed stone or gravel, fine aggregates of clean natural sand or crushed stone sand or combination of both using minimum 360 kg/cum of cement with non-circular virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240 C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC laid, spread and compacted with slip-form paver of minimum 7.50 m width, including curing and tining by texturing cum curing machine complete all as specified and directed. Required surface texturing to be done as specified in Clause 10.1.14 and Table-9 of IRC 15-2017 complete all as specified and directed by Engr in charge. Note:- (a) Flexural strength shall be established by beam test and design mix formula should be compatible to IRC-44-2017 (b) All types of joints shall be measured and paid separately under respective item of BOQ. (c) Cost of any admixtures required to achive the desired properties of PQC shall be deemend to be included in the unit rate (d) Two coat of surface shield/densified as specified. | 255.75 | CUM |
| 3 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide, Grade A filled with sealing compound complete all as specified and directed by Engr in charge. | 34.10 | 10 RM |
| 4 | M & L forming 25 mm wide expansion joint in concrete slab for full depth of PQC. Joint cleaned thoroughly with application of compressed air and shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris. The joint then filled with pre-molded 25 mm thick compressible polyethylene closed cell type filler board as specified thereafter application of two coats of primer with thin brush by onward and backward movement at an interval of 30 minutes before placing the backup rod and pouring the sealant. Placing of closed cell medium density, crossed linked polyethylene foam backup rod of 30 mm dia, over filler board and filled with polyurethane based sealant complying with BS 5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor (MAF) of +/- 30% having minimum 10 year performance guarantee applying masked tape on the edges of joints and removing the masking tape after filling of sealant as per the method specified by the manufacture complete as specified and directed. | 31.00 | 10 RM |
| 5 | Supply and fixing solar delineator light, dimension 70x70x100mm, direction 360 degree, round light protected with MS mesh, fitted on 45/50 mm dia mild steel pipe of 1000 mm (200mm below GL and 800mm above GL)height, powder coated including embedding in PCC 1:2:4 (300x300x450mm) type B1 complete all as specified and directed | 30.00 | Each |
6 Days Left