Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4848054 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Provision Of Three Chlorination Plants Alongwith Connected Works At Swimming Pools Building No P39 And P274 And Solapokhari Pump House Building No T76 C At Ins Chilka Under Ge Chilka |
| Last Date For Submission | 25th Jul, 2026 |
| Opening Date | 27 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 49000.00 |
| Estimated Cost | 2425665.00 |
| City | Khurda |
|---|---|
| State | Odisha |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply and fix fabricating and erecting welded structure made out of mild steel channel or angle section of reqd size and shape including clamp, back plate with bolts, nuts & washers drilled for bolts, welding, bending cold or hot in any shape or size including all fixing arrangement and painted with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. | 1.00 | Qtl |
| 2 | Supply Install testing and commisioning of Chlorine dosing system consisting of following specification : PREPARATIONTANK 1 Type: Vertical cylindrical with flat end and bolted top cover 2 Capacity:1000 liters 3 Liquid/Material to be handled:Cholrine 4 OperatingTemperature:45 Deg. Cel 5 OperatingPressure:Atmospheric 6 Material of Construction:LDPE(Transparent Chemical Tank) 7 Testing:Leakage Test: Water Fill up 8 Quantity: 01Nos DOSING PUMP 1 Model:UEMD-01 2 Type:Mechanical Diapgram Pump 3 Flow Capacity: 0 100 Liter Per Hour 4 Suction Pressure:Flooded 5 Discharge Pressure: 10Kg/Sq.Cm 6 Material of wetted parts(Liquid End): PP 7 Capacity adjustment:0 to100 %Manually 8 Speed Reduction:By Integral Worm and Worm Wheel 9 Volumetric efficiency: 90% 10 Quantity: 2Nos(1Working+1Standby) | 5.00 | Each Job |
| 3 | Item Ser No 2.00, description continue/---- PUMP DRIVE MOTOR 1 Type: Asynchron sq.cage induction with VFD 2 Supply system:3 ph , AC, 415+10%, 50 Hz 3 Mounting/deg protection:B 3(Foot)/IP55 4 No of poles/SPEED : 4pole/1365-1440RPM 5 Insulation class/temp rise:class F/limited to lassB 6 Methods of cooling:TEFC 7 Applicable standard:IS 325 8 Rating: 1.0HP 9 Motor frame type: As per DIN/IEC34-7/DE &NDE greasing nipples require 10 Starting conditions : Direct on line starting (DOL) Cold condition:consec. Starts. Hot condition : consec. Starts. 11 Noise level(less than):85 dB (A) at a distance of 1mtr. 12 Quantity: 2Nos AGITATOR 1 Type: GD010028900 2 Model:Slow speed,Motorized,with bearing arrangement 3 Impeller type:3 Bladed, Propeller 4 Material of construction Shaft & Impeller:SS:304 5 Mounting:Top Entry,Center mounted 6 Out put RPM:90-110 RPM | ||
| 4 | Item Ser No 2.00, description continue/---- AGITATORDRIVEGEAREDMOTOR 1 Rating : 0.5HP 2 Quantity : 01 Nos MOTOR-PUMP SHAFT COUPLING 1 Type/Model : Flexible coupling 2 Quantity : 02 Nos PRESSURE RELIEF VALVE 1 Type: Direct Spring loaded 2 Size: 1/2 3 Material of Construction:BSP (F)PP/PVC 4 Set Pressure: 5Kg/Sq.Cm 5 Quantity : 01 No STRAINER 1 Type: Y Type 2 Filtration rating: 40 Mesh 3 Size:1/2 Threaded 4 Material of Construction: PP/PVC 5 Quantity : 01No PULSATIONDAMPENER 1 Type:Cylindrical Bottle Type 2 Material of Construction:PVC 3 Quantity :1No | ||
| 5 | Item Ser No 2.00, description continue/----PRESSURE GAUGE (with diaphragm seal) 1 Type: Bourdon Sensing Type 2 Mounting/ entry: Direct(Local)/bottom 3 Dial Size: 100 MM 4 Process Connection:1/2"BSP(M) 5 Material of Construction of Wetted Part:SS:304 6 Material of Construction of Case: DieCastAluminum/SS 7 Accuracy: 1 % 8 Range:0 -5Kg/Sq. Cm 9 Quantity:1 No BALLVALVES A) SuctionSide: 1 Type:Ball valves 2 Material of Construction: U-PVC/PP 3 Size: 15NB 4 End connection: Socket Pasted B) Discharge Side: 1 Type:Ball valves 2 Material of Construction: U-PVC/PP 3 Size: 15NB 4 End connection: Socket Pasted |
6 Days Left