Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4550315 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Ge (n) P/token- 05 Of 2026-2027 Conversion Of Charpoy Gi Pipe Nylon Newar/ Charpoy Gi Folding Nylon Newar Into Plywood Top And Repair/ Polishing To Trade Pattern Furniture Items Under Bso (n) Pune And Kolhapur Under Ge (north) Pune |
| Last Date For Submission | 6th Jul, 2026 |
| Opening Date | 08 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 69980.00 |
| Estimated Cost | 3499000.00 |
| City | Kolhapur |
|---|---|
| State | Maharashtra |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Conversion of Charpoy GI Pipe 32 mm Newar to Charpoy GI 32 mm plywood top as shown in draing No. FD-220. | ||
| 2 | (i) Removing old, torn Nylon Newar from existing charpoy GI pipe. (ii) Supply of 7 layer 12mm BWR ISI marked plywood of size 6 6 x3 . (iii) Supply of 03 (Three) nos of extra stiffener of size 40mmx06mm MS flat iron of 85cm( +/- 2cm) length with three holes of size 10mm (One in the centre and one each on both side of centre hole at a distance of 12 ). (iv) Fixing of all three M S square pipe 25mm x 25mm iron stiffener into the exiting gaps between long rails which may vary in each case (one in the centre & other two at 6 distance from each short rails) by welding ensuring that the stiffeners fit tight against the inner walls of both long rail. Care must be taken to ensure that stiffeners & upper crest of GI pipe long rails are at same level. (v) Fixing of 7 layer12mm BWR plywood to the holes made on the M S flat iron stiffener with 9 counter-sunk flat head scres/locks nuts & bolts as directed by Engr-in-Charge. (vi) Corners of plywood shall be rounded off and suitably holed with rose bit to prevent heads of nuts/bolts from protruding out in case bolts other than flat head are used. All four corners & bottoms of plywood to be chiselled/suitably sheared off to the extent to ensure housing of raised portion of elbow and chuk nuts, to make the plywood seat flat on rails & stiffener evenly throughout. Remaining details all as directed by Engr-in-Charge. | 500 | Each |
| 3 | M&L for dismantling of u/s GI long rail of 25 mm dia from charpoy GI pipe 32 mm dia, supply and fixing of new GI long rail of 32 mm dia medium grade ISI marked duly both end threaded and fixed all as shown on drawing. | 70 | Each |
| 4 | Dismantling of u/s GI short rail of 32 mm dia from charpoy GI pipe 32 mm dia, providing by cutting, threading both end and forming of short rail from retrieved of 32 mm dia GI long rail obtained from item Sl No 1.02 above and all as shown on drawing. | 70 | Each |
| 5 | Dismantling of u/s GI leg 32 mm dia from Charpoy GI pipe 32 mm dia, providing by cutting, threading one end and forming of leg from retrieved 32 mm dia GI short rail obtained from item No 1.02 and 1.03. Welding of 3 mm thick 50 mm dia MS plate to the bottom, face of the leg & 25 x 3 mm flat iron made to shape and size of clamp with 16 guage washer at the bottom of clamp for fixing MNF set rest as shown on drawing. | 140 | Each |
6 Days Left