Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4033026 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Comprehensive Maintenance Of Jcos Married Accn At Ii Lines Area Under Ge Alipore |
| Last Date For Submission | 8th May, 2026 |
| Opening Date | 11 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 60000.00 |
| Estimated Cost | 3000000.00 |
| City | Kolkata |
|---|---|
| State | West Bengal |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Dismantling removing all unsound concrete, plastered material by chipping/chiseling gently at all effected and adjoining areas of concrete etc till sound surface is reached all various locations in building subsequently cleaning the surfaces by hair brush and air blower and including removal of debris outside MoD land complete all as specified and directed. | 100.00 | Sqm |
| 2 | Removing of concrete all around reinforcement bar upto 12 mm dia and over from behind the reinforcing bars average 25mm (but not less than 15mm air gap)by manual methods (using wire brushing ,chiseling etc) and M&L for applying chloride free rust removing chemical on rusting steel reinforcement bar and removing all rust from steel reinforcement bar by emery paper and M&L for cleaning the area thoroughly by water and allow it to dry and totally rust free of reinforcement bar including complete all as specified and directed. Make( Rust removing chemical ):- Reebaklens RR of FOSROC or equivalents solutions SIKA/STP as approved by GE. | 450.00 | RM |
| 3 | Preparation of existing reinforcement surface by brush and M & L for applying two component epoxy zincrich primer on existing reinforcement surface (minimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2) and maximum coverage area 5.00 Sqm per litre. complete all as specified and directed. Make- Nitozinc primer of FOSROC or equivalent make as approved by GE. | 450.00 | RM |
| 4 | M&L for TMT reinforcement bars upto 12 mm dia and over for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc complete all as specified and directed. | 100.00 | RM |
| 5 | Supply, mixing and placement of micro-concrete cement based prepacked single component chloride free, sulphate free, non-shrink, free flow. elf compacting, ready to use after mixing water in specified proportion. (Make: Sika Rep Microconcrete-4 or renderoc-RG of Fosroc as approved by GE) in required thickness as per manufacture's instruction having. Compressive strength (ASTN C 109,cm cube) of 35 MPa at 28 days including application curing compound concrete WB manufactured by Fosroc of equivalent as approved by GE at various locations in Bldgs including necessary form work complete all as per manufactures specification | 3.50 | Cum |
20 Days Left