Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5023097 |
|---|---|
| Organisation Name | Kolkata Municipal Corporation |
| Tender Brief | Installation Link Connection Of Newly Installed Tube-well With Pipeline At Kasaipara In Ward No.60. |
| Last Date For Submission | 28th Jul, 2026 |
| Opening Date | 31 Jul, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 2530.00 |
| Estimated Cost | 126480.00 |
| City | Kolkata |
|---|---|
| State | West Bengal |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. | 62.5 | CUBIC METER PERCENT |
| 2 | Cutting & picking up existing metalled black top portion of road surface to an average depth of 300 mm by using Jack hammer with all necessary tool and plant including reening the serviceable materials & stacking within a lead of 75 mtr. all complete as per direction of the Engineer-in-Charge. | 37.5 | CUBIC METER |
| 3 | Lowering any type of Ductile Iron (DI) pipes & specials and laying along trench at any depth as per speclfication and direction of the Engineer-incharge, ( laying over ground. the rates shall be, reduced by 10% and the rates so reduced shall be inclusive of cost of all sorts of holding arrangements]Diameter in mm 100mm dia. | 120 | %METER |
| 4 | Flange joint to C.l./D.l/MS. pipes and specials including supply of rubber gasket. nuts. bolts. washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the Engineer-in-Charge. Diameter in mm 100mm dia. | 9 | EACH |
| 5 | Lowering, fitting and fixing of all types of valves in proper position and alignment using chain pully block or crane(for diameter above 250 mm) by providing temporary support,as required,gaskets,nuts& bolts etc.all cornplete as per specification and direction of the Engineer-in-Charge.[The rate Includes cost of flange joints]100mm dia. | 3 | EACH |
7 Days Left