Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4444711 |
|---|---|
| Organisation Name | Bridge And Roof Company India Limited |
| Tender Brief | Sheeting Works And Miscellaneous Civil And Structural Works For Renovation Of Template Floor Building At Howrah Workshop Premises |
| Last Date For Submission | 19th Jun, 2026 |
| Opening Date | 20 Jun, 2026 |
| Document Cost | 590.00 |
|---|---|
| EMD | 36800.00 |
| Estimated Cost | 1747962.00 |
| City | Kolkata |
|---|---|
| State | West Bengal |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Renovation Template Floor Work At HOWRAH Workshop | ||
| 2 | REMOVAL OF OLD GALVALUME SHT/GCI SHEET/TRANSLUCENT SHEET: Removal of old Galvalume Sht/GCI SHEET / TRANSLUCENT SHEET from the sloped roof of the following height of WorkShop Floor Building/other building and taking down to the ground including removal of tie nuts /tie rod/tie plate ( if required gas cutting/hackshaw cutting)etc. fixed on the sheets & taking down all materials to ground , shifting to the scrap within 500 mtrs and stacking the sheets in one place and dumping the strutural materials in scrap yard within 500 mtrs from working area (building boundary) inside B AND R Work Shop premices , taking all the necessary safety precaution (including providing scaffolding & staging if required) to complete the job as per direction af engineer- in -charge. [ NOTE: (1). The superficial area of corrugated sheet & cladding as laid shall be measured on the flat in sqm with out allowance for laps & corrugations if any. (2). Portions of roof coverings overlapped by ridge or hip etc shall be included in the measurement of the roof]. | ||
| 3 | Maximum Height up to 9.0 m from GL /FL | 1175.00 | SQM |
| 4 | Maximum Height up to 15.0 m from GL /FL | 625.00 | SQM |
| 5 | REMOVAL OF OLD GI RIDGE : Removal of old GI RIDGE from the sloped roof of approximate following maximum height of Template Floor Building/other work shop building and taking down to the ground including removal of tie nuts /tie rod/tie plate etc. fixed on the Ridge & stacking the Ridge in the scrap yard within 500 mtrs inside B AND R Work Shop premices from the working bidg boundary taking all the necessary safety precaution described in Sl. No. 1 to complete the job as per direction af engineer- in -charge. |
19 Days Left