Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3886229 |
|---|---|
| Organisation Name | Urban Improvement Trust |
| Tender Brief | Road Furniture Work In Area Of Zone Ii A (arc) |
| Last Date For Submission | 1st Apr, 2026 |
| Opening Date | 02 Apr, 2026 |
| Document Cost | 3500.00 |
|---|---|
| EMD | 200000.00 |
| Estimated Cost | 10000000.00 |
| City | Kota |
|---|---|
| State | Rajasthan |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. | 200.00 | Cum |
| 2 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400-12 & 400-13 and MoRTH Specification Clause 406. | 300.00 | Cum |
| 3 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. | 5000.00 | Cum |
| 4 | Providing and laying Bituminous Macadam on prepared surface with specified graded crushed aggregates as per Table 500-7, Grading-2, for base/binding course including loading of aggregates with F.E. loader and heating & mixing of stone aggregate and bitumen (including cost of anti-stripping compound, wherever required) in hot mix plant (40-60 TPH), transporting the mixed Material in tipper to paver (sensor as per clause 504.3.5), and laying mixed Material with paver finisher to the required level and grade, rolling by power roller and vibratory compactor as per Cl. 501.6 & 501.7 to achieve the desired density (approved by the department) excluding cost of primer/tack coat. [MoRTH Specification : Clause 504, 112]. with all lead & lift 50/75mm compacted thickness with 3.3% bitumen VG30 grade | 300.00 | Cum |
| 5 | Providing and laying 20mm thick Mix Seal Surfacing on a prepared surface in a single course composed of specified close graded crushed stone aggregates (as per table 500-19) premixed with bituminous binder (including cost of anti-stripping compound, wherever required). In a Hot Mix Plant 40-60 TPH with F.E. loader, laying with paver finisher, transporting the mixed Material by tipper and rolling with power roller 8-10 tonne, to achieve desired density approved by the department, but excluding cost of tack coat with all lead & lift (MoRTH specification : clause 508). Type B (19 kg binder per 10 sqm) bitumen VG30 grade. | 5000.00 | Sqm |
Ending Today