Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4276845 |
|---|---|
| Organisation Name | Irrigation Department |
| Tender Brief | Drip Phase Ii Part A Completion Works Strengthening Of Hoisting Pillars Of Penstock Shutters Safeguarding Kip Campus By Providing Fencing And Compound Wall Strengthening Of Abutment Wall Of The Dam Enhancing Basic Facilities Of Kallada Dam Et |
| Last Date For Submission | 12th Jun, 2026 |
| Opening Date | 12 Jun, 2026 |
| Document Cost | 2760.00 |
|---|---|
| EMD | 191000.00 |
| Estimated Cost | 9576029.00 |
| City | Kottarakkara |
|---|---|
| State | Kerala |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | APPENDIX A-Retrofitting of columns of operating mechanism of penstock shutters | ||
| 2 | 26.28.2:Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge50mm average thickness | 92.640 | sqm |
| 3 | OD27338/2024-2025:Providing base jack for supporting | 8.000 | each |
| 4 | 26.29.2:Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars above 12 mm diameter | 585.600 | metre |
| 5 | 26.29.1:Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter | 604.200 | metre |
Closed