Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4599735 |
|---|---|
| Organisation Name | Irrigation Department |
| Tender Brief | Corrigendum : And Infrastructure Works For Installation Of Submersible Pump In Puthenapadam In Kuzhuppilly Panchayath Supply And Installation Of Submersible Pump And Pipe Laying-general Mechanical Work-re Tender |
| Last Date For Submission | 3rd Jul, 2026 |
| Opening Date | 06 Jul, 2026 |
| Document Cost | 2670.00 |
|---|---|
| EMD | 50000.00 |
| Estimated Cost | 7311017.00 |
| City | Kozhikode |
|---|---|
| State | Kerala |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Pump Installation | ||
| 2 | OD46370/2025-2026:Supply, installation, testing, trial run and commissioning of submersible pumpset with minimum efficiency 65% capable of discharging 511 lps against total head of 6.5 mtrs, with electric motor 75 HP suitable for handling fresh and silty water with maximum rpm 1000. The material of construction of the casing NICI and impeller shall be stainless steel CF8M with Chrome steel A276 type shaft. The prime mover for the pump should be 3 phase totally enclosed water cooled motor confirming to IS 9283 , energy efficient standard rating suitable for 415V +/- 10%, 50Hz +/- 5% connection with class ?H? insulation, suitable cable confirming to IS 732:2019, length 15 m / as per site conditions. Meter board with fuse as per KSEB specification and electrical inspectorate norms, prefabricated closed type control panel board completely wired and fitted with fully automatic star delta starter, main switch with ISI mark, Ammeter, volt meter, VSS, RYB indicating lamps, 6A MCB for RYB indication lamp, HRC fuse, neutral link, ELCB, suitable capacitor, SPP, 2 nos of earth pit suitable for motor as per KSEB specification and electrical inspectorate norms, with all necessary protection units and instrumentation with MPU Panel board and 700mm Gate valve | 2.000 | set |
| 3 | 18.72.25:Providing and laying S & S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329:700 mm dia Ductile Iron Class K - 9 pipes | 60.000 | metre |
| 4 | 18.69.2:Providing and laying D.I Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 :Above 600 mm dia | 4.000 | quintal |
| 5 | 18.70.12:Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:750 mm dia pipes | 14.000 | joint |
7 Days Left