| 1 | Primary Cable:
Supply, Installation, Testing and Commissioning of Single Continuous Length Primary Cable 12 mm nominal diameter, constructed with 7 strands containing 19 wires each over Independent Wire Rope with Steel Core (7 19 IWRC), complete with end terminations, anchoring arrangements, tensioning/sag adjustment, alignment and associated fittings as required for satisfactory operation.
Material of Construction (MOC): High tensile hot-dip galvanized steel wire rope with steel core (IWRC).
Nominal Cable Diameter: 12 mm
Construction: 7 19 IWRC
Safe Working Load (SWL) / Working Load Limit (WLL): Minimum 25 kN
Minimum Breaking Load (MBL): 125 kN or higher
Make: Reputed/EIC approved.
Certification Requirement:
Minimum Breaking Load and rope properties shall be supported by OEM test certificates and comply with relevant EN, IS, ASTM or equivalent accepted standards. | 280.00 | RMT |
| 2 | Zipline Trac pulley/Impact trolley for Primary Cable: Supply, Installation, Testing and Commissioning of Zip line trolleys/pulleys compatible for Primary cable with T Handle and Hook/Catch mechanism, continuous Slings & lanyards and carabiner with durable front and rear impact surfaces, having double sealed ball bearing for even load distribution, multiple attachment points for harnesses and safety gear, smooth riding experience and safe braking situation. The trolley should be able to handle the speeds of at least 30m/s, rider capacity of 150kg and minimum breaking strength of 30kN. The trolley must be equipped with rider orientation restraint/forward design and pivoting bar to keep the rider facing forward.
MOC: High strength anodized Aluminum housing, Stainless Steel Sheaves, ABS Impact Surfaces, High Strength Polyester tubular webbing resistant to environmental factors.
Minimum Breaking Strength: 30kN & 22kN for slings
Size 180 x 111 x 33 mm, Sling Quantities in 120cm and 180cm, At least 25mm width and sufficient length to wrap around the Anchoring points.
Make: Reputed. | 4.00 | No. |
| 3 | Full Body Harness: Supply, testing and commissioning of full body zipline safety harness compatible with single or double lanyard operation, complete with shock-absorbing positioning lanyards, attachment connectors and all accessories required for safe zipline operation. The harness shall be designed for fall arrest, positioning and rider restraint applications, ensuring secure load distribution and user comfort during prolonged use.
Technical Requirements / Specifications:
Multiple attachment points including ventral, sternal and dorsal attachment points for fall arrest and positioning applications.
Adjustable shoulder, chest and leg straps for proper fit and orientation.
Padded waist, leg and shoulder support for improved comfort and load distribution.
Double-locking / quick-connect buckles with load-rated attachment hardware.
Integrated shock absorbing lanyard system compatible with zipline trolley assemblies.
Water and abrasion resistant high-strength webbing.
Minimum webbing strength: 25 kN
Minimum buckle strength: 19 kN
Suitable user load capacity: minimum 150 kg
Material (MOC): High-density polyester/polyamide webbing with steel or alloy attachment hardware
Compliance: EN 361, EN 358, EN 813, UIAA / CE or equivalent international safety standards.
Service life and inspection requirements as per OEM recommendations.
Make: Reputed OEM approved for industrial fall protection / adventure activities / zipline applications.
Harnesses shall be available in appropriate sizes for children and opearators with adjustable fitting arrangements for varying body dimensions. | 6.00 | No. |
| 4 | Continuous Fall Arrest System
Safety Cable:
Supply, Installation, Testing and Commissioning of Single Continuous Length Safety Cable, 10 mm nominal diameter, constructed with 07 strands each containing 19 individual wires over Independent Wire Rope with Steel Core (7 19 IWRC), independently anchored from the primary cable at both towers, complete with end terminations, anchoring arrangements, tensioning/sag adjustment, alignment and all associated hardware required for satisfactory operation.
Material of Construction (MOC): High tensile hot-dip galvanized steel wire rope with steel core (IWRC).
Nominal Cable Diameter: 10 mm
Construction: 7 19 IWRC
Safe Working Load (SWL) / Working Load Limit (WLL): 17.4 kN
Minimum Breaking Load (MBL): 87 kN or higher
Anchoring Requirement:
Safety cable shall be provided with independent anchoring and support arrangements separate from the primary cable anchorage system to ensure redundancy in the event of primary system failure.
Accessories Included: End terminations, anchor connections, tensioning arrangements and installation hardware.
Make: Reputed/EIC approved.
Certification Requirement:
Minimum Breaking Load and cable properties shall be supported by OEM test certificates and comply with relevant EN, IS or equivalent accepted standards. | 240.00 | Rmt |
| 5 | Zipline Safety Trolley for Safety Cable:
Supply, Installation, Testing and Commissioning of heavy-duty zipline safety trolley compatible with the specified safety cable, complete with integrated auto-locking connector/carabiner, continuous Slings and lanyards, rider orientation mechanism required for safe operation. The trolley shall ensure smooth movement along the safety cable, maintain rider stability and provide continuous secondary safety support during operation.
Technical Specifications:
Suitable for operating speed: 25 m/s
Minimum rider load capacity: 150 kg
Minimum breaking strength (MBS): 30 kN
Self-orienting design to maintain rider in a forward-facing position during travel.
Integrated auto-locking connector/carabiner compatible with approved zipline harness systems.
Anti-derailment / anti-disengagement provision for enhanced operational safety.
Sealed maintenance-free bearings for smooth operation and reduced wear.
Material (MOC): High strength anodized aluminium alloy body/frame with stainless steel sheaves and corrosion-resistant hardware, High Strength Polyester tubular webbing resistant to environmental factors.
Minimum dimensions: 160 130 90 mm or OEM standard, whichever is higher, Sling Quantities in 120cm and 180cm, at least 25mm width and sufficient length to wrap around the Anchoring points.
Compliance: EN 12278 / CE / UIAA or equivalent internationally accepted standards.
Suitable for repeated outdoor use under varying environmental conditions.
Make: Reputed / EIC approved.
| 4.00 | No |
