| 1 | Providing, Supplying, erection, testing and commissioning of NON CLOG SUBMERSIBLE
SEWAGE PUMPSET(Power Driven Submersible pumps primarily designed for handling waste water with End Suction Enclosed Impeller and Volute Casing) sets fitted with effective motor, mechanical seal, thermal and moisture sensor, suspension device, anti coupling
bracket, 10 m guide pipe and Cable From Sump Well to pump Chamber including LT PMU autocoupling with integral bend (with autocoupling Pin SS Foundation Bolt Complete with base frame and RCC Foundation) complete in all respects as per scope of work and specification of Non Clog submersible pumpset of discharge 453 cum/hr, and 45 m head (150HP). | 3 | EACH |
| 2 | Providing, supplying, erecting, installing, testing, and commissioning of a multi-compartment LT Indoor panel with A/M change over switch for DG and EB power source, independent feeders for pumps, PLC Control panel , field instruments, Including Pump Monitoring Unit (PMU), UPS, for Pump operation VFD panel with a bypass switch and emergency Star/Delta starter, A/M switch for Auto control from PLC, Push buttons for manual operation, status indicating lamps, with reputed make contactors, Volt and Amp meters, cables, MCBs etc. Motor control Panel - having required front surface area, fabricated in fully artmentalized design from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c aning and finishing complete with 10 tank spray based tricationic phosphating treatment process for powder coating in approved shade, PU Foam Gasket without manual pasting, joint less (temperature withstand capacity -40degC to plus 120degC) for maintaining IP protection,power capacitors etc., integrated and synchronized withSCADA master control system of 12.50MLD STP inKHERI MARKANDA ensuring the panel complete inall respects to the satisfaction of the Engineer-in-Charge. (designed for a 150 HP non-clog submersiblesewage pump set with an additional 15% loading marginfor safety) | 1 | Set |
| 3 | Providing, supplying, erecting, and fixing of (2Nos)Mechanical Coarse Bar Screen: Channel width:1000mm, Channel depth:7000mm (Minimum), Waterdepth: 600mm, Bar spacing: 20mm, Bar profile:10mmx50mm, MOC: SS304, Design flow: 9.00MLDAvg. Flow (Minimum) with peak factor 2.5, includingUltrasonic type differential level sensor for automaticoperation, Belt Conveyor 600mmX2000mm forscreening removal, Control panel PLC and SCADAbased, integrated and synchronized with SCADAsystem of main 12.50MLD STP in Kheri Markanda
complete in all respect to the satisfaction of TheEngineer-In-Charge. | 1 | Set |
| 4 | Providing, supplying, erection, testing and commissioning Supply and installation of cast iron
manually operated sluice gates of size 900 mm (W) 900 mm (D) to be provided at the receiving chamber, complete in all respects as per IS 13349:1992. The sluice gate shall be suitable for open channel installation, including all necessary components such as frame, gate leaf, spindle, operating mechanism, and anchor bolts. The gate shall be pressure-tight and suitable for sewage application, coated with anticorrosive epoxy paint. | 3 | EACH |
| 5 | Providing and laying Double Flanged (Screwed/Welded) centrifugally (Spun) Ductile Iron Pipes of
Class K-9 conforming to IS : 8329 (450mm Dia) | 50 | Metre |
