Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4122879 |
|---|---|
| Organisation Name | Himachal Pradesh Irrigation And Public Health Department |
| Tender Brief | Drilling Of 10 Nos Borewell 100m Deep Installing Of Hand Pumps In Around The Already Existing Handpumps Falling On Or Along The New Proposed Road Sansari Killar Tandi Under 94 Rcc Gref Hq Under Jsv Section Udaipur Tindi Miyar Distt Lahaul Spiti H |
| Last Date For Submission | 7th May, 2026 |
| Opening Date | 08 May, 2026 |
| Document Cost | 1500.00 |
|---|---|
| EMD | 57480.00 |
| Estimated Cost | 2873835.00 |
| City | Lahul and Spiti |
|---|---|
| State | Himachal Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Transportation of suitable truck / tractor mounted where road available or with portable rigs where road not available with DTH / ODEX / Percussion / Calyx / Rotary alongwith necessary accessories etc. to the site of work and erection including levelling of site etc. complete in all respects as per directions of Engineer - in - Charge. | 5.00 | Nos. |
| 2 | Drilling bores of 152 mm dia. as per IS: 2800-1979 using ODEX (TUBEX) attachement required drilling in collapsible strata conglomerate boulder, pebble, gravals, silt, clay etc. including cost of attachments, consumable stores, bits, water,POL etc. complete with system of simultaneous lowering of 125 mm nominal bore, 5.0mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25 mm dia. Advani Oerlikon electrodes,with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respects as per directionss of Engineer-in-Charge.MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately. | 500.00 | Rmt. |
| 3 | Supplying and lowering of IS Marked 125 mm NB 5 mm thick fin cut MSERW casing pipes as per IS 4270:2001 and requriement of ODEX attachments from approved manufacturing complete in all respect as per direction of Engineer-in- Charge. | 500.00 | Rmt. |
| 4 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of the Engineer-in-Charge. | 5.00 | Nos. |
| 5 | Collection and preservation of soil samples in polythene bags complete in all respects as per the directions of the Engineer-in-Charge. | 5.00 | Nos. |
8 Days Left