Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4564801 |
|---|---|
| Organisation Name | Rural Engineering Department |
| Tender Brief | Corrigendum : Repair And Waterproofing Of The Roof Of The Administrative Building At The District Institute Of Education And Training Diet Lalitpur. |
| Last Date For Submission | 30th Jun, 2026 |
| Opening Date | 30 Jun, 2026 |
| Document Cost | 766.00 |
|---|---|
| EMD | 19500.00 |
| Estimated Cost | 961000.00 |
| City | Lalitpur |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. As per DSR-2023 (Item No. 15.26) | 400.00 | Sqm |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) As per SI no. 4.1.8 | 20.73 | Cum |
| 3 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm as per SI no 11.41.2 | 159.07 | Sqm |
| 4 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. as per SI no. 10.31 | 142.48 | Kg |
| 5 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary. Extra for cutting rebate in flush door shutters as per SI No- 9.21.2 | 22.86 | Sqm |
6 Days Left