Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4952977 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair / Maintenance Of Road And Road Furniture At Zone Ii At Under Age(i) Lansdowne |
| Last Date For Submission | 14th Aug, 2026 |
| Opening Date | 25 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 60000.00 |
| Estimated Cost | 3000000.00 |
| City | LANSDOWNE |
|---|---|
| State | Uttarakhand |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level complete all as specified and directed. | 288.00 | Cum |
| 2 | M&L for Cement concrete work in road /Path/ Hard Standing having minimum 28 days field flexural strength of 40kg/ sqcm , thickness of concrete 25 cm or less, aggregate gradation as per table 3 of IRC 15-2017, coarse aggregate of clean, hard strong, dense, non-porous and durable pieces of crushed stone or gravel, fine aggregate of clean natural sand or crushed stone sand or combination of both using minimum cement content of 400 kg/cum complete all as specified and directed.Using Cement OPC 43 Grade only.Note :- (i) The design mix shall be got done from approved lab and got approved from GE/AGE (I) before commencement of work. (ii) In the event of variation in the design mix in the minimum cement content will be adjusted through supply only rate at market rate or procurment rate whichever is more for cement. However no plus adjustment shall be applicable, if excess quantity of cement content is used/ approved in the execution of work under this items. (iii) Required surface texturing to be done as specified in clause 10.1.14 and table 9 of IRC: 15-2017. | 288.00 | Cum |
| 3 | M&L for forming expansion joints 12 mm thick , filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'A' for depth 150 mm complete all as specified and directed. | 11.20 | X RM |
| 4 | M&L for forming Contraction (Dummy) joints 50 mm deep x 10 mm wide,filled with sealing compound Grade A complete all as specified and directed. | 14.00 | X RM |
| 5 | M&L for forming construction joints 30 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed. | 21.00 | X RM |
6 Days Left