Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4446055 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Construction Of Internal Road For Development Settlement At Chumur Under Sdp |
| Last Date For Submission | 4th Jun, 2026 |
| Opening Date | 06 Jun, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 102200.00 |
| Estimated Cost | 5110000.00 |
| City | LEH |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m :All kinds of soil | 1650.00 | Cum |
| 2 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 | 231.00 | Cum |
| 3 | Providing, laying , spreading and compacting graded stone aggregate (size range 53mm to 0.075mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plants, carriage of mixed material by tipper to site , for all leads and lifts ,laying in uniform layer with mechanical paver finisher in sub base 1 base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density complete as per specification and direction of engineer in charge. | 238.50 | Cum |
| 4 | Providing and laying tack coat using hot straight run bitumen of grade 80-100 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen, boiler, cleaning & preparing the existing road as per specification on @0.75kg/Sqm including cost and carriage of all involved materials complete. | 3180.00 | Sqm |
| 5 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-30 @3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plantof 100-120 TPH capacity. | 159.00 | Cum |
4 Days Left