| 1 | Taking down old unserviceable LT Panel and Supply, fixing, connecting and commissioning of LT panel, factory made (CPRI approved), Indoor/outdoor type (kiosk), floor mounted, compartment type, dust and vermin proof (IP-55 protection) suitable for 415 volts grade, 3 phase, 4wire 50Hz AC supply with 400 Amp aluminium bus bar TPN, colour coded & sleeved, fabricated out of 3.15 mm thick mild steel CRCA sheet mounted on 50mmx50mmx6mm angle iron frame and welded to 75cm long 50mmx50mmx6mm size angle iron legs (04 Nos), front & rear openable, with front hinged double door inclusive locking arrangement with provision of all incoming/outgoing cable entries alongwith suitable size double compression type cable glands and adopter boxes for incoming and outgoing cable & spray painting with two coats of first quality super enameled grey paint over and including a coat of red oxide primer, including anti-corrosive treatment (7 tank), legs grouted in floor in PCC (1:2:4) bed block of size 30cmx30cmx60cm, complete all as specified and directed, comprising the following :- (a) MCCB 250 Amp, 4 pole, 415 Volt, 50Hz, AC, with rupturing capacity 25 KA with adjustable thermal and fixed magnatic release (I/C) - 01 No. (b) MCCB 160 Amp, 4 pole, 415 Volt, 50Hz, AC, with rupturing capacity 25 KA with adjustable thermal and fixed magnatic release (O/G) - 02 No.
(b) MCCB 100 Amp, 4 pole, 415 Volt, 50Hz, AC, with rupturing capacity 16 KA with adjustable thermal and fixed magnatic release (O/G) - 02 No.
(c) On Load Change Over Switch I-O-II , 320 Amp, 4 Pole, 415 Volt, 50 Hz - 01No.
(d) Pre-wired Digital meter with voltmeter, ammeter, slector switch, CTs and LED Indication Lights- 01 Set.
(e) Bus bar chamber with electrolytic grade aluminum strip with heat shrink cable sleeves with colour code supported on epoxy resin based insulator 4 strips of suitable length for current rating 400 A. | 1.00 | Each |
