Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4642768 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Provision Of Electrical Infra For Ascon Ph-iv Node Under Ge 865 Ews |
| Last Date For Submission | 14th Jul, 2026 |
| Opening Date | 21 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 46800.00 |
| Estimated Cost | 2338000.00 |
| City | Leh Ladakh |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply, installation, testing and commissioning of step down Transformer 11/0.415 KV capacity 250 KVA level III, IS-1180 Part-I outdoor type copper wound 3 phase 4 wire, 50 cycle per second, oil immersed naturally cooled external cooling tube core type Delta connection on primary side (HV side) and star connection on secondary side (LV side) having typing 0, + 2.5%, + 5%, + 7.5% to charged by means of hand operated, off load/ tap charging gear including first filling of new transformer oil of dielectric strength not less than 60 KV with standard fitting with such as two earthing terminals for body and one additional for neutral brought out in bushing, oil level gauge indicator for level minimum and maximum, lifting lugs, rating and terminal plate, plain breather device to prevent ingress of rain water and inserts, drain cum sampling value 20 mm bore steel with plug, dial type thermo meter, oil filling hole 32 mm threaded with plug. The transformer shall be powder coated for water/ dust and vermin proof. Note- (1) Transformer oil shall be conforming to requirement of IS 335-1983 specification for new insulating oil for transformer. (2) Equipment shall be suitable to operate at 3500 Mtr above MSL at temperature variation between (-) 25 degree centigrade to (+) 35 degree centigrade, complete all as specified and/or as directed by Engr-in-Charge. | 1.00 | Each Job |
| 2 | Material & labour for construction of platform for installation of transformer of size all as shown in Drawing No CELZ-TD-02-2022-PLATFORM FOR TRANSFORMER UPTO 500 KVA, including chain link fencing around PCC platform for 250 KVA transformer of size 6m x 6m x 1.8m including 50 x 50 x 6mm angle iron post embedded in PCC 1:3:6 type C2 foundation of size 0.3 x 0.3 x 0.45m including angle iron 50 x 50 x 6mm at corner braced with angle iron 25 x 25 x 6mm support including filling aggregate of 40mm to 63mm size of spread thickness 100mm all around. The platform along with entrance gate of size 1.5m wide and height same as fencing complete all as specified & directed. | 1.00 | Each Job |
| 3 | Supply, laying and testing XLPE insulated, armoured electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade, laid in trences or passing through pipes, ducts or fixed to walls/poles, of the following sizes:- | ||
| 4 | 150 Sqmm 3.5 Core. | 65.00 | RM |
| 5 | 95 Sqmm 3.5 Core. | 125.00 | RM |
6 Days Left