Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4895709 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair And Maintenance Of Black Top Road At Along Mil Stn |
| Last Date For Submission | 3rd Aug, 2026 |
| Opening Date | 05 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 40000.00 |
| Estimated Cost | 2000000.00 |
| City | Likabali |
|---|---|
| State | Arunachal Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Repair to potholes any depth, not exceeding 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc., cutting around edges to at least 25 mm in depth, making good by applying tack coat with cationic bitumen emulsion RS-1 grade at the rate of 5 kg per 10 sqm, putting in premix bituminous macadam, well rammed and sealed ith binder 9.8 Kg per 10 Sqm , blinded ith 0.09 of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm complete all as specified and as directed. | 2.10 | 10 Sqm |
| 2 | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete and applying tack coat on existing bituminous, cement concrete with VG 10 bituminus primer at the rate of 5 kg per 10 sqm of surface complete all as specified and as directed. Note:- Tack coat shall be applied with mechanical sprayer only. | 150.00 | 10 Sqm |
| 3 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exceeding 400 sqm, depth exceeding 50 mm but not exceeding 100 mm complete all as specified and as directed. | 40.00 | 10 Sqm |
| 4 | M&L for premix bituminous macadam n.exc 75mm thickness using hot mix plant and mechanical paver with 4% binder (Paving bitumen VG 30 grade) content by weight of total mix, laid/rolled and compacted to required gradient and camber using 8 to 10 tonnes power roller completeall as specified and as directed. Note:- The minimum bitumen content shall be 4% of total mix. However, no price adjustment shall be made if bitumen content is more than 4% after design mix. | 20.00 | Cum |
| 5 | M & L for semi dense bituminous premix asphaltic dense concrete 40 mm consolidated thickness using graded crushed stone aggregate premixed with binder (paving grade bitumen VG 30 grade) @ 5.5% by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and as directed. Note :- (i) Semi dense bituminous concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The minimum biyumen content is 5.5%of total mix. No price adjustment shall be made if bitumen content is more than 5.5% after design mix. (iii) Rolling shall be done in three stages as per Clause 5.6.2 of IRC 111:2009 using 9 to 10 tone dead weight or vibratory steel wheel roller, penumatic roller of 12 to 15 tone and finally 6 to 8 tone smooth wheel roller. | 150.00 | 10 Sqm |
10 Days Left